A CLOSER LOOK
A little more about this product
Gavita CT 2000e Output, Electrical Load and Build
Product details
- This fixture is rated at 650W input and 2000 µmol/s of PAR output, which works out to 3.0 µmol/J.
- The driver accepts 208–480V at 50/60 Hz.
- Current runs 3.125A at 208V, 2.35A at 277V and 1.35A at 480V, with a power factor above 0.90.
- Those numbers let an electrician size a lighting panel before the fixtures arrive.
- Each unit adds about 2,218 BTU/hr to the room, so HVAC planning should start from that figure.
- The housing measures 24.6 x 12.1 x 5.3 in and weighs 34.5 lb.
- That compact footprint hangs from the included wire hangers or a Unistrut bracket.
- It is rated IP65 for indoor wet locations and runs in ambient temperatures from 0 to 40°C.
- The spectrum is broad white with enhanced blue, so one fixture carries a crop from veg through flower.
- Replacing HPS with a Compact LED Toplight
- A compact led toplight earns its keep in rooms already laid out for double-ended HPS.
- Gavita built the CT to hang where the old reflectors hung, with a light throw close to what the crop is used to.
- Its flower footprint is roughly 4x4 to 5x5 ft per fixture.
- Expect less radiant heat at the canopy than with HPS, so leaf temperature will drop at the same air setting.
- Many growers raise room temperature a couple of degrees after the switch to keep transpiration on track.
- Watch the first run closely and log runoff, because plants under LED often drink less.
- Dimming runs from 35 to 100 percent through the EL3 Master Controller, sold separately, over 0–10V and RJ45 links.
- That lets one controller ramp a whole room at sunrise and pull it back if tops start to bleach.
- Budget for the controller when you plan the room, since dimming depends on it.
- It is overkill for a home tent, where commercial input voltage rarely matches the wiring.
- High output per fixture: 2000 µmol/s from 650W for commercial flower rooms.
- Broad 208–480V driver: One model covers 208V, 277V and 480V commercial service.
- HPS-style footprint: Hangs in existing DE layouts with a compact body and HPS-like light throw.
- EL3 room control: Dims from 35 to 100 percent with the Gavita Master Controller over 0–10V and RJ45.
- IP65 wet location: Tolerates wash-downs and humid flower rooms.
- Technical Specifications
Specifications
- Model
- CT 2000e, 208–480V (HGC906415)
- Input Power
- 650W
- PPF
- 2000 µmol/s
- Efficacy
- 3.0 µmol/J
- Spectrum
- Broad white with enhanced blue
- Input Voltage
- 208–480V, 50/60 Hz
- Current
- 3.125A @ 208V, 2.35A @ 277V, 1.35A @ 480V
- Power Factor
- > 0.90
- Dimming
- 35–100% with Gavita EL3 Master Controller (sold separately)
- Dimensions
- 24.6 x 12.1 x 5.3 in
- Weight
- 34.5 lb (15.6 kg)
- Ambient Temperature
- 0–40°C
- Mounting
- Wire hangers and Unistrut bracket included
- Certifications
- UL 8800, UL 1598, UL 8750, CSA C22.2 No. 250.0 / 250.13
- High output per fixture
- 2000 µmol/s from 650W for commercial flower rooms.
- HPS-style footprint
- Hangs in existing DE layouts with a compact body and HPS-like light throw.
Questions & discussion
Have a question or something useful to share? Start the conversation.