A CLOSER LOOK
A little more about this product
Gavita 1930e Output, Electrical Load and Build
Product details
- The CT is rated at 1,930 µmol/s from 780W, about 2.5 µmol/J.
- The autosensing driver runs on 120–277V at 50/60 Hz.
- Current falls from 6.6A at 120V to 2.9A at 277V, with a power factor above 0.95.
- On a 20A, 120V circuit that leaves room for two fixtures, while 277V service carries far more per breaker.
- Plan cooling around 2,661 BTU/hr of heat per unit.
- The body measures 29 x 11.8 x 3.9 in and weighs 33.07 lb, close to the size of a DE reflector.
- It hangs from the included hangers or a Unistrut bracket.
- A cold-forged aluminum heat sink handles cooling without fans.
- The housing is IP66 rated for 104°F ambient.
- Listings include UL 1598, UL 8800 and CSA C22.2 No.
- 250.0, and Gavita backs it for 5 years.
- Using an HPS Replacement LED in an Existing Room
- An hps replacement led saves the most time in a room already hung, wired and zoned for DE fixtures.
- Gavita built the CT to take the place of its own Pro 1000e, so the grid, hangers and circuits can stay where they are.
- Coverage is about a 4x4 ft canopy per fixture.
- The canopy gets less radiant heat than under HPS.
- Many growers raise room temperature slightly or lower humidity to keep leaves transpiring.
- Check runoff during the first run, since plants often use less water after the switch.
- An EL Master Controller, sold separately, dims the fixtures from 10 to 100 percent.
- One controller channel handles up to 2,000 fixtures, so a whole building can ramp sunrise and sunset together.
- Start around half power in early veg and bring it up as the canopy fills.
- For a single small tent, a lighter fixture fits better than this commercial toplight.
- 1,930 µmol/s from 780W: Commercial output from one fixture at about 2.5 µmol/J.
- HPS footprint: Takes the place of a Gavita Pro 1000e DE in existing layouts.
- Autosensing 120–277V: Runs on household or commercial lighting circuits.
- Room-wide control: EL Master Controller dims 10–100 percent and runs up to 2,000 fixtures per channel.
- Passive cooling: Cold-forged aluminum heat sink with no fans to service.
- IP66 and UL 8800: Sealed for humid flower rooms and listed for horticultural use.
Specifications
- Model
- CT 1930e LED, 120–277V (HGC906740)
- Input Power
- 780W
- PPF
- 1,930 µmol/s
- Efficacy
- 2.5 µmol/J
- Spectrum
- Full spectrum, 400–700 nm
- Coverage
- About 4 x 4 ft canopy
- Input Voltage
- 120–277V, 50/60 Hz
- Current
- 6.6A @ 120V to 2.9A @ 277V
- Power Factor
- > 0.95
- Dimming
- 10–100% with Gavita EL Master Controller (sold separately)
- Control Capacity
- Up to 2,000 fixtures per channel
- Dimensions
- 29 x 11.8 x 3.9 in
- Weight
- 33.07 lb (15 kg)
- Mounting
- Hangers and Unistrut bracket
- Certifications
- UL 1598, UL 8800, CSA C22.2 No. 250.0
- HPS footprint
- Takes the place of a Gavita Pro 1000e DE in existing layouts.
Questions & discussion
Have a question or something useful to share? Start the conversation.