12V 16W COB LED Panel Light with Dimmer 1600LM Warm Nature Cold White DC12V Dimmable LED Bulb for Diy Work read desk Lamp
Item Description
Main Features of Sumbulbs 9450 LED Panel Light COb Board
Chips brand: Epistar
Meterial: Aluminum-alloy Board + Silicon Rubber
Power: 15W
Input Voltage: DC 12V-14V
Max Current :1200mA
Luminous flux: 100LM/W
Light Color: Cold White (6000-6500K) Warm White (2800K-3200K) Nature White (4000-4500K) Blue(450-460nm)
Size: 94mm*50mm
Lighting area: 79mm*50mm
Low attenuation, 1000h attenuation<1
Product picture
Wireless RF ControllerCaution:packege without Battery!!!(Battery is not include)Please add CR2025 OR CR2032 Battery .
Instructions
1. Dimmer & Dynamic2. 8 Dynamic Effects
3. 10-level Dimmer 4. 256-Grade PWM
5. Speed Adjustable6. Card Type Remote
7. Ultra Slim Design8. Smooth Dimmer Effect
9. 1 to 1 Remote Paired10. Auto Save Function
1.Turn On/Standby
Press this key to turn on unit or switch to standby mode.Unit will turn on and restore to previous status at powering on moment.
2.Lighting Mode
Switch to lighting mode from dynamic mode.
3/8/9. Dimmer Adjust Shortcuts
Switch to 100%,50%,or 25% brightness lighting mode.
4/6. Dynamic Mode Adjust
Switch to dynamic mode from lighting mode,or switch between different dynamic modes.
5/7. Speed Adjust
Adjust playing speed of dynamic modes.Press SPEED+ to increase speed and press SPEED- to decrease.
10/11. Brightness Adjust (Dimmer)
Adjust lighting mode brightness.Press BRIGHT+ to increase brightness and press BRIGHT- to decrease.
Functions
Installing
1.Power Supply
This unit accepts DC 12V to 14V power supply.The red cable should be connected to positive and black cable to negative.Please select proper power supply according to the LED application.
2.LED Output
The red cable should be connected to LED positive and black cable to negative.The peak output current is 6A,please reduce load if main unit is overheating.
CAUTION!Do not short circuit the LED output,this may lead to permanent damage!
3.Remote Controll
Please pull out the insulate part before using.The RF wireless remote signal can pass through barrier,so it’s not necessary to aim at the main unit when operate.For proper receiving remote signal,do not install the main unit in closed metal parts.The remote battery is 3V CR2025 type,please only replace with same type battery.
Specification
