Match the light-emitting surface to the optic
A beam-angle label usually describes a level within a distribution, often half of peak intensity.
Read the guideLE
LEDiL STRADA-2X2
LEDiL STRADA-2X2 — Optics. Selection notes: Match the emitter package, light-emitting surface and mechanical reference points to the optical part.
Read the conditions, not just the number.
This is an editorial profile of published manufacturer data, not an independent measurement. Values belong to the named model or family and the conditions shown in the parameter table. Consult the source revision and full ordering code before design approval.
| Parameter | Value | Basis | Conditions / source |
|---|---|---|---|
| Body / footprint width | 50 mm | nominal | Optic mechanical family outline; beam distributions vary by order code. ↗ |
| Body / footprint length | 50 mm | nominal | Optic mechanical family outline; beam distributions vary by order code. ↗ |
Match the emitter package, light-emitting surface and mechanical reference points to the optical part. Review intensity distribution files rather than only the named beam angle. A lens family can contain many distributions; the result changes with source geometry, spacing and cover materials.
This is an editorial profile of published manufacturer data, not an independent measurement. Values belong to the named model or family and the conditions shown in the parameter table. Consult the source revision and full ordering code before design approval.
Product overview
Documentation-based · not a hands-on testProduct overview
This is an editorial profile of published manufacturer data, not an independent measurement. Values belong to the named model or family and the conditions shown in the parameter table. Consult the source revision and full ordering code before design approval.
Selection notes
Match the emitter package, light-emitting surface and mechanical reference points to the optical part. Review intensity distribution files rather than only the named beam angle. A lens family can contain many distributions; the result changes with source geometry, spacing and cover materials.
Evidence and limits
An omitted parameter is unknown here, not zero. Typical, minimum and maximum values are not interchangeable. A family profile is not an exact electrical configuration and does not automatically qualify for the driver selector.
Features
Main features
- Match the emitter package, light-emitting surface and mechanical reference points to the optical part. Review intensity distribution files rather than only the named beam angle. A lens family can contain many distributions; the result changes with source geometry, spacing and cover materials.
Who is it for?
Optics
Reference conditions
This is an editorial profile of published manufacturer data, not an independent measurement. Values belong to the named model or family and the conditions shown in the parameter table. Consult the source revision and full ordering code before design approval.
What to consider
Test against your actual business requirements.
Check before choosing
An omitted parameter is unknown here, not zero. Typical, minimum and maximum values are not interchangeable. A family profile is not an exact electrical configuration and does not automatically qualify for the driver selector.
First-hand user reviews
Write a review ↗Ratings use approved public reviews only. Experiences vary with the conditions of use.
There are no published reviews yet.
Try another filter or share a useful discovery.
Share your experience
Describe the use case and disclose relevant relationships. Reviews are moderated before publication.