Büyümenin daha parlak bir yolu. Fabrikadan doğrudan toptan satış. 15 yılı aşkın süredir gelişen uzmanlık

Bu içerik şu anda orijinal dilinde mevcuttur.

Trolmaster 1.5 Digital Flow Meter

Model / Ürün Kodu: DFM-3

This meter installs inline on a 1.5 in water or nutrient main.

Pipe size
1.5 in
Package size
255 x 135 x 80 mm
Model
DFM-3
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Kaynak referans fiyatıTRY 5,528.33

Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.

Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.

Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM

Bu ürün hakkında biraz daha bilgi

This meter installs inline on a 1.5 in water or nutrient main.

Product details

  • What the TrolMaster DFM-3 Reads
  • It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
  • A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
  • The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
  • It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
  • With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
  • The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
  • It is rated to 250 psi and works from 32 to 122 °F.
  • The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
  • Placing a 1.5 Inch Flow Meter on a Main Line
  • A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
  • Install it downstream of the pump and filter, before the line branches to the zone valves.
  • Orient it with the direction of flow and support heavy pipe on both sides of the meter.
  • Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
  • Keep the LCD facing the walkway so readings can be checked on every round.
  • Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
  • Enter each zone's target volume and confirm the first totals with a measured fill.
  • A total that climbs on an unchanged program points to a leak worth chasing.
  • A total that falls often means filters or drippers need attention.
  • Flush the pipework before installation so debris does not catch inside the meter.
  • Installed with care, it keeps large rooms on a consistent, measurable feed.
  • 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
  • On-board LCD: Live flow rate and total volume at the pipe.
  • Feed by Volume: Aqua-X Pro doses each cycle by gallons.
  • Technical Specifications

Teknik Özellikler

Model
DFM-3
Pipe size
1.5 in
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Output
Flow rate and total volume
Compatible controller
Aqua-X Pro (direct or via SPH-1 hub)
Certifications
CE, FCC, ETL
Package size
255 x 135 x 80 mm
Gross weight
1.37 lb
Feed by Volume
Aqua-X Pro doses each cycle by gallons.

Bunu projeniz için işe yarar hale getirelim.

Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.

Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.

BİRLİKTE BÜYÜYELİM

Sorular ve tartışma

0

Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.

KEŞFETMEYE DEVAM EDİN

Mekanınız için daha fazla olanak

Tüm ürünleri görüntüle
İYİ BİR ŞEYİN BAŞLANGICI

Projenizi gün ışığına çıkaralım.

İhtiyaçlarınız hakkında bize biraz bilgi verin. Verdiğiniz bilgiler doğrultusunda size uygun bir toptan satış teklifi hazırlayacağız.

Ürün listeniz

Ödeme yok. Yükümlülük yok. Sadece faydalı bir sohbet.