Bu içerik şu anda orijinal dilinde mevcuttur.
Aydınlatma AksesuarlarıToptan satış sorgusu
Sero Bus Cable, 1 ft
Model / Ürün Kodu: 705135
Sero 1 ft Bus Cable for Side-by-Side Modules
- Type
- System bus cable
- Length
- 1 ft
- Compatibility
- Sero System
Kaynak referans fiyatıTRY 595.51
Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.
Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.
Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM
Bu ürün hakkında biraz daha bilgi
Sero 1 ft Bus Cable for Side-by-Side Modules
Product details
- A controller and its add-on modules talk to each other over a shared system bus.
- When two of those units mount next to each other, a long cable only adds clutter.
- This Sero cable spans just 1 foot.
- It bridges neighboring components on a panel, shelf or wall board.
- With so little length, there is no coil to tuck away behind the equipment.
- Short runs also leave less cable exposed to bumps, carts and spray.
- Sero states that only its approved bus cables should connect system components.
- Using the matched cable keeps the connection in line with what the system was designed for.
- Each cable links one component to the next.
- A row of modules needs one cable for every gap between them.
- Plan the layout so each pair of units sits close enough for this short span.
- Wiring a Sero System Panel with Short Links
- Mount the components first so the spacing is fixed before any cable goes in.
- Power the system down before plugging in or removing a bus cable.
- Seat each connector fully until it stops, then give it a light tug to confirm it holds.
- Keep the cable flat against the panel rather than looped in the air.
- Avoid bending it sharply right at the plug, where strain does the most damage.
- Label both ends when several modules share one board.
- Those labels save time later when a unit needs to come out for service.
- Keep bus cables apart from mains power wiring where the layout allows.
- Restore power and check that the controller sees every connected component.
- Inspect connectors during routine maintenance for dust, moisture or corrosion.
- Replace a cable that shows a cracked jacket or a loose plug.
- 1 ft Length: Links components mounted side by side.
- No Excess Slack: Keeps panels clean and tidy.
- Sero Approved: Matched to Sero System components.
- One Link per Gap: Connects one unit to the next.
- Less Exposure: Short run stays out of the way.
Teknik Özellikler
- Type
- System bus cable
- Length
- 1 ft
- Compatibility
- Sero System
Bunu projeniz için işe yarar hale getirelim.
Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.
Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.
KEŞFETMEYE DEVAM EDİN
Tüm ürünleri görüntüleMekanınız için daha fazla olanak
Aydınlatma Aksesuarları
Yield Lab Professional Series Double Ended Grow Light Reflector
Kaynak referansıTRY 3,271.75
Aydınlatma Aksesuarları
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Kaynak referansıTRY 15,063.97
Aydınlatma Aksesuarları
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Kaynak referansıTRY 7,554.66
Sorular ve tartışma
Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.