Bu içerik şu anda orijinal dilinde mevcuttur.
Havalandırma ve İklimlendirmeToptan satış sorgusu
Ruck 8 Back Draught Dampner
Model / Ürün Kodu: 149394
How the 8 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Kaynak referans fiyatıTRY 1,158.77
Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.
Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.
Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM
Bu ürün hakkında biraz daha bilgi
How the 8 Inch Back Draught Damper Seals an Idle Duct
Product details
- Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
- The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
- On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
- Mounting a Backdraft Shutter in the Right Place
- Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
- Put it downstream of the fan with the flaps opening the way the air goes.
- The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
- Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
- If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
- Nudge the speed up a step.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Teknik Özellikler
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Bunu projeniz için işe yarar hale getirelim.
Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.
Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.
KEŞFETMEYE DEVAM EDİN
Tüm ürünleri görüntüleMekanınız için daha fazla olanak
Havalandırma ve İklimlendirme
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Kaynak referansıTRY 7,554.66
Havalandırma ve İklimlendirme
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Kaynak referansıTRY 7,050.85
Havalandırma ve İklimlendirme
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Kaynak referansıTRY 6,043.22
Havalandırma ve İklimlendirme
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
Kaynak referansıTRY 9,569.90
Sorular ve tartışma
Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.