Büyümenin daha parlak bir yolu. Fabrikadan doğrudan toptan satış. 15 yılı aşkın süredir gelişen uzmanlık

Bu içerik şu anda orijinal dilinde mevcuttur.

Havalandırma ve İklimlendirmeToptan satış sorgusu

Ruck 12 Back Draught Dampner

Model / Ürün Kodu: 149477

How the 12 Inch Back Draught Damper Seals an Idle Duct

Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Kaynak referans fiyatıTRY 1,964.87

Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.

Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.

Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM

Bu ürün hakkında biraz daha bilgi

How the 12 Inch Back Draught Damper Seals an Idle Duct

Product details

  • At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
  • The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
  • Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
  • Mounting a Backdraft Shutter in the Right Place
  • Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
  • Install it after the fan, flaps opening downstream.
  • There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
  • Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
  • A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Teknik Özellikler

Duct Size
12 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Nothing about it is powered
airflow alone opens it and spring pressure alone closes it.
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Bunu projeniz için işe yarar hale getirelim.

Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.

Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.

BİRLİKTE BÜYÜYELİM

Sorular ve tartışma

0

Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.

KEŞFETMEYE DEVAM EDİN

Mekanınız için daha fazla olanak

Tüm ürünleri görüntüle
İYİ BİR ŞEYİN BAŞLANGICI

Projenizi gün ışığına çıkaralım.

İhtiyaçlarınız hakkında bize biraz bilgi verin. Verdiğiniz bilgiler doğrultusunda size uygun bir toptan satış teklifi hazırlayacağız.

Ürün listeniz

Ödeme yok. Yükümlülük yok. Sadece faydalı bir sohbet.