Büyümenin daha parlak bir yolu. Fabrikadan doğrudan toptan satış. 15 yılı aşkın süredir gelişen uzmanlık

Bu içerik şu anda orijinal dilinde mevcuttur.

Havalandırma ve İklimlendirmeToptan satış sorgusu

Quest Duct Kit (Hi-E 195)

Model / Ürün Kodu: 4039132

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Kaynak referans fiyatıTRY 9,320.52

Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.

Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.

Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM

Bu ürün hakkında biraz daha bilgi

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Product details

  • This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
  • A duct cover plate blocks off the opening the ducted setup no longer uses.
  • Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
  • Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
  • The installation sheet for the kit is TS-1059, written for the Hi-E series.
  • The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
  • Nothing else is needed from the dehumidifier side.
  • Flex or rigid duct in matching sizes completes the run.
  • Why Growers Fit a Dehumidifier Duct Kit
  • A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
  • That keeps its heat and noise out of the room and frees floor space for plants.
  • Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
  • Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
  • Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
  • Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
  • Plan the drain line at the same time, since a remote unit still needs a path for condensate.
  • The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
  • 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
  • Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
  • Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
  • Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
  • Technical Specifications

Teknik Özellikler

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)

Bunu projeniz için işe yarar hale getirelim.

Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.

Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.

BİRLİKTE BÜYÜYELİM

Sorular ve tartışma

0

Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.

KEŞFETMEYE DEVAM EDİN

Mekanınız için daha fazla olanak

Tüm ürünleri görüntüle
İYİ BİR ŞEYİN BAŞLANGICI

Projenizi gün ışığına çıkaralım.

İhtiyaçlarınız hakkında bize biraz bilgi verin. Verdiğiniz bilgiler doğrultusunda size uygun bir toptan satış teklifi hazırlayacağız.

Ürün listeniz

Ödeme yok. Yükümlülük yok. Sadece faydalı bir sohbet.