Büyümenin daha parlak bir yolu. Fabrikadan doğrudan toptan satış. 15 yılı aşkın süredir gelişen uzmanlık

Bu içerik şu anda orijinal dilinde mevcuttur.

Hidroponik ve SulamaToptan satış sorgusu

HydroLogic Evolution Wall Mount Bracket · Stainless, RO1000

Model / Ürün Kodu: 741585

What the Evolution Wall Mount Bracket Holds

Dimensions
11.375 W x 4.25 H x 6.1875 D in
Material
Stainless steel, heavy duty
Weight
1.122 lbs
Mounting Note
Fix to studs or anchors rated past the loaded system weight
Kaynak referans fiyatıTRY 4,633.05

Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.

Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.

Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM

Bu ürün hakkında biraz daha bilgi

What the Evolution Wall Mount Bracket Holds

Product details

  • A filter stack, off the floor.
  • It measures 11.375 by 4.25 by 6.1875 in and weighs 1.122 lbs.
  • It replaces the older HL 10057 part.
  • Why Heavy Duty Stainless Suits the Wall Behind an RO Unit
  • That wall gets wet and stays wet.
  • Plated steel rusts there, which is the whole reason for the material choice.
  • The more important number is not the bracket though.
  • It is what the bracket is screwed into.
  • Full of water an Evolution stack weighs far more than the bracket does.
  • The fixing carries the job: find studs, or use anchors rated well past the loaded weight.
  • Screws and washers come in the box, which is worth knowing because the ones most people reach for are plated.
  • Wall anchors are not included, since the right anchor depends on what you are drilling into.
  • HydroLogic describes the part as mounting an Evolution-RO to a variety of surfaces rather than naming one model.
  • It is not tied to the RO1000 alone.
  • Gets the system off the floor: Wall mounted, which is usually where an RO stack belongs.
  • Heavy duty stainless: The wall behind an RO unit stays wet.
  • Plated steel does not last.
  • Screws and washers included: The fasteners most people would otherwise grab are plated steel.
  • Replaces HL 10057: The older bracket part number, superseded by this one.
  • Not RO1000 only: HydroLogic describes it as mounting an Evolution-RO generally.
  • Anchors are not included: The right anchor depends on the wall, so that choice is yours.
  • Dimensions: 11.375 by 4.25 by 6.1875 in.
  • Technical Specifications

Teknik Özellikler

Material
Stainless steel, heavy duty
Dimensions
11.375 W x 4.25 H x 6.1875 D in
Weight
1.122 lbs
Mounting Note
Fix to studs or anchors rated past the loaded system weight

Bunu projeniz için işe yarar hale getirelim.

Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.

Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.

BİRLİKTE BÜYÜYELİM

Sorular ve tartışma

0

Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.

KEŞFETMEYE DEVAM EDİN

Mekanınız için daha fazla olanak

Tüm ürünleri görüntüle
İYİ BİR ŞEYİN BAŞLANGICI

Projenizi gün ışığına çıkaralım.

İhtiyaçlarınız hakkında bize biraz bilgi verin. Verdiğiniz bilgiler doğrultusunda size uygun bir toptan satış teklifi hazırlayacağız.

Ürün listeniz

Ödeme yok. Yükümlülük yok. Sadece faydalı bir sohbet.