Büyümenin daha parlak bir yolu. Fabrikadan doğrudan toptan satış. 15 yılı aşkın süredir gelişen uzmanlık

Bu içerik şu anda orijinal dilinde mevcuttur.

Aydınlatma AksesuarlarıToptan satış sorgusu

Growlink HUB Connection Cable (3M)

Model / Ürün Kodu: HUB-CON-3M

Wiring the Growlink HUB Connection Cable into Your LINKS System

HUB Power Budget
Within 1A shared across 8 ports
Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
Kaynak referans fiyatıTRY 503.31

Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.

Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.

Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM

Bu ürün hakkında biraz daha bilgi

Wiring the Growlink HUB Connection Cable into Your LINKS System

Product details

  • The Growlink HUB Connection Cable runs a 3-meter (9 ft 10 in) line between any compatible LINKS device and the LINKS 8-Port Device HUB.
  • It uses 8-conductor RJ-45 straight-through wiring terminated on standard RJ-45 jacks at both ends.
  • The single cable carries 24VDC power and Modbus data together.
  • That keeps each device on one port instead of pulling power and signal on separate runs.
  • The wiring matches what the HUB documentation calls out for every port, so any 8-conductor RJ-45 cable to that spec drops in.
  • Planning Runs with a 3m LINKS Device RJ-45 Cable
  • At 3 meters, the run covers most layouts where the HUB sits just outside a flower room.
  • The device end can land on a canopy frame, controller wall, or substrate tray inside the space.
  • Growers running the 8-Port Device HUB usually allocate one cable per LINK device port.
  • The canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, and Batch TankLINK family all use this same connector.
  • Each draws within the HUB's 1A power budget.
  • If a sensor lands farther out, this Growlink HUB accessory pairs with another drop to bridge the gap.
  • A single LINKS automation cable rarely reaches a far-corner device on its own in larger rooms.
  • 3-Meter Length: Spans 9 ft 10 in from HUB port to device — long enough for most room-to-canopy runs.
  • RJ-45 Straight-Through Wiring: Eight-conductor pinout matches every Growlink LINK device port and the HUB's documented spec.
  • Power + Data on One Line: Delivers 24VDC and Modbus signal so each LINK draws everything from a single port.
  • HUB-Native Connector: Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.
  • Cultivation-Environment Build: Jacketing holds up to the temperature swings and humidity typical inside flower and veg rooms.
  • Technical Specifications

Teknik Özellikler

Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
HUB Power Budget
Within 1A shared across 8 ports
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
HUB-Native Connector
Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.

Bunu projeniz için işe yarar hale getirelim.

Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.

Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.

BİRLİKTE BÜYÜYELİM

Sorular ve tartışma

0

Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.

KEŞFETMEYE DEVAM EDİN

Mekanınız için daha fazla olanak

Tüm ürünleri görüntüle
İYİ BİR ŞEYİN BAŞLANGICI

Projenizi gün ışığına çıkaralım.

İhtiyaçlarınız hakkında bize biraz bilgi verin. Verdiğiniz bilgiler doğrultusunda size uygun bir toptan satış teklifi hazırlayacağız.

Ürün listeniz

Ödeme yok. Yükümlülük yok. Sadece faydalı bir sohbet.