Büyümenin daha parlak bir yolu. Fabrikadan doğrudan toptan satış. 15 yılı aşkın süredir gelişen uzmanlık

Bu içerik şu anda orijinal dilinde mevcuttur.

Growlink Batch TankLINK pH Sensor

Model / Ürün Kodu: GL-LINK-PHSENSOR

Reading Acidity with the Growlink Batch TankLINK pH Sensor

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Kaynak referans fiyatıTRY 4,029.99

Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.

Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.

Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM

Bu ürün hakkında biraz daha bilgi

Reading Acidity with the Growlink Batch TankLINK pH Sensor

Product details

  • The Growlink Batch TankLINK pH Sensor reads nutrient solution acidity inside a batch tank or reservoir in real time.
  • The probe covers the full 0–14 pH range at ±0.02 pH accuracy with 0.01 pH resolution.
  • A 10-foot cable runs from the sensor to the Batch TankLINK controller.
  • The cable terminates on a BNC connector that pushes onto the controller port.
  • A quarter-turn clockwise locks it in place.
  • Inside the typical hydroponic feed window of 5.5–6.5 pH, that accuracy is tight enough to confirm a fresh batch lands inside spec on the first mix.
  • Calibrating and Maintaining the TankLINK pH Probe
  • Calibration is a two-point process with pH 7.00 and pH 4.01 buffer solutions.
  • The TankLINK LCD wizard walks the probe through each buffer in turn and locks the cal at a stable voltage.
  • Run cal at the start of each batch or whenever the reading drifts past ±0.05 pH between known mixes.
  • The pH probe ships in a storage cap of pH 4 buffer and potassium chloride.
  • The membrane needs to stay wet between runs.
  • A dry membrane is the fastest way to kill a pH probe early.
  • Keep the storage cap on whenever the sensor sits out of solution.
  • Plug-and-play wiring keeps a single-probe swap during teardown under a minute.
  • The nutrient tank pH probe twists out of the BNC port and a fresh one twists in.
  • 0–14 pH Range: Full-scale read covers anything a hydro feed will ever hit, including post-dosing spikes.
  • ±0.02 pH Accuracy: Tight enough to confirm fresh mixes land in the 5.5–6.5 feed window on the first measurement.
  • 0.01 pH Resolution: Catches small drifts between feeds before they show up as canopy stress symptoms.
  • BNC Connector with 1/4-Turn Lock: Push-on, twist-lock fit on the TankLINK controller's labeled port — no rewiring at swap.
  • Two-Point Calibration: pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.
  • Technical Specifications

Teknik Özellikler

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Compatible Controller
Growlink Batch TankLINK
Two-Point Calibration
pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.

Bunu projeniz için işe yarar hale getirelim.

Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.

Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.

BİRLİKTE BÜYÜYELİM

Sorular ve tartışma

0

Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.

KEŞFETMEYE DEVAM EDİN

Mekanınız için daha fazla olanak

Tüm ürünleri görüntüle
İYİ BİR ŞEYİN BAŞLANGICI

Projenizi gün ışığına çıkaralım.

İhtiyaçlarınız hakkında bize biraz bilgi verin. Verdiğiniz bilgiler doğrultusunda size uygun bir toptan satış teklifi hazırlayacağız.

Ürün listeniz

Ödeme yok. Yükümlülük yok. Sadece faydalı bir sohbet.