Büyümenin daha parlak bir yolu. Fabrikadan doğrudan toptan satış. 15 yılı aşkın süredir gelişen uzmanlık

Bu içerik şu anda orijinal dilinde mevcuttur.

Growlink 4 Triac Out Module

Model / Ürün Kodu: BMT-F-TO4 BACnet MS/TP

4-Channel Triac Output Module for Fast-Cycling Dosing Loads

Supply voltage
24 V AC/DC
Outputs
4 × solid-state triac
Mounting
TH35 DIN rail (IEC 60715)
Kaynak referans fiyatıTRY 12,343.39

Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.

Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.

Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM

Bu ürün hakkında biraz daha bilgi

4-Channel Triac Output Module for Fast-Cycling Dosing Loads

Product details

  • The BMT-F-TO4 carries four solid-state triac outputs rated 0.8 A each at 24 V AC/DC.
  • Where a DO-4 relay would burn out chasing the rapid pulses an HE Anderson injection pump asks for, the triac switches stay clean.
  • The pump fires rhythmically at the injection rate the dosing recipe calls for, and BACnet MS/TP carries the setpoints from the Growlink controller.
  • BACnet MS/TP Triac Module with Manual Override on Every Channel
  • Each output gets a three-position black toggle.
  • Setting A lets Growlink software command the channel.
  • Setting 1 forces the triac on.
  • Setting 0 locks it off.
  • The module clips to a TH35 DIN rail and lands the BACnet line on spring-clamp terminals, so commissioning takes minutes per panel.
  • Wire it next to a BMT-F-DI4 or BMT-F-AOP4 for a full BACnet I/O stack on the same trunk.
  • 4 triac outputs at 0.8 A: Solid-state switching for fast-cycling AC loads like HE Anderson dosing pumps and small solenoid valves.
  • BACnet MS/TP communication: Plugs into the Growlink controller and any other BACnet trunk without protocol gateways.
  • Manual A/1/0 toggle per channel: Switch from software control to forced on or forced off without rewiring the panel.
  • 24 V AC/DC supply: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
  • TH35 DIN rail mount: Spring-clamp terminals snap into IEC 60715 rail for clean panel build-outs.
  • No mechanical relays to wear out: Triac switching handles the rapid pulse trains a relay would burn out on inside a season.
  • Stackable with BMT-F-DI4 / BMT-F-AOP4 / BMT-F-RTR: Build a full BACnet MS/TP I/O bank on one trunk with the Metz Connect family.
  • Technical Specifications

Teknik Özellikler

Outputs
4 × solid-state triac
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)

Bunu projeniz için işe yarar hale getirelim.

Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.

Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.

BİRLİKTE BÜYÜYELİM

Sorular ve tartışma

0

Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.

KEŞFETMEYE DEVAM EDİN

Mekanınız için daha fazla olanak

Tüm ürünleri görüntüle
İYİ BİR ŞEYİN BAŞLANGICI

Projenizi gün ışığına çıkaralım.

İhtiyaçlarınız hakkında bize biraz bilgi verin. Verdiğiniz bilgiler doğrultusunda size uygun bir toptan satış teklifi hazırlayacağız.

Ürün listeniz

Ödeme yok. Yükümlülük yok. Sadece faydalı bir sohbet.