Bu içerik şu anda orijinal dilinde mevcuttur.
Hidroponik ve SulamaToptan satış sorgusu
AutoPot - easy2Propagate Lid
Model / Ürün Kodu: APWS210
What the AutoPot easy2Propagate Lid Covers
- Finish
- Clear
- Weight
- 7.0 lb
Kaynak referans fiyatıTRY 7,322.40
Sadece karşılaştırma amaçlıdır. Güncel toptan fiyatınızı, stok durumunu ve teslimat koşullarını talep edin.
Ödeme gerekmiyor. İhtiyaçlarınız hakkında bir görüşme.
Fabrikadan doğrudan destek15 yılı aşkın deneyim
DAHA YAKINDAN BAKALIM
Bu ürün hakkında biraz daha bilgi
What the AutoPot easy2Propagate Lid Covers
Product details
- This is the lid on its own, sized to sit over the 47 by 21.5 in easy2Propagate garden tray.
- It is clear, so light reaches the cuttings and seedlings under it, and it weighs 7.0 lb.
- Four fitted vents are built into the top.
- Each vent opens and closes on its own, which is what gives the lid its range.
- All four shut, and the air under the lid holds the warmth and humidity a fresh cutting needs.
- One or two open, and the lid is letting a rooted plant start breathing room air.
- All four open, and it is a rain cover with airflow underneath.
- That adjustability is the whole argument for a lid over a tray rather than a loose sheet of plastic.
- Keep the vents closed at the start, targeting seventy to eighty degrees Fahrenheit and at least eighty percent humidity while roots form.
- Then they open gradually once seedlings or cuttings have rooted.
- A bench-length tray under a single lid is a lot of plants under one climate.
- It is the size that makes this a production piece rather than a windowsill one.
- The lid is the cover alone, part number APWS210.
- Running a Clear Propagator Lid Through a Rooting Cycle
- A clear propagator lid does its real work in the first week and its subtle work in the second.
- Fresh cuttings have no roots to replace the water their leaves lose, so the air around them has to stay close to saturated.
- Vents shut, lid on, and leave it alone.
- Condensation on the inside of the lid is the sign that the humidity is where it should be.
- Lift the lid once a day for a few seconds to change the air, then set it straight back.
- The second week is about letting go slowly.
- Open one vent the day the first roots show, another two days later, and work up to all four over a week.
- A cutting hardened off that way keeps growing.
- One moved from a sealed lid to open air in a single afternoon wilts, and some never recover from that wilt.
- Watch for a vent that is open but surrounded by heavy condensation, because that means the air is not moving through it.
- Wipe the inside of the lid between cycles with a mild sanitiser and rinse it well.
- Damping-off fungi live on the film that builds up on the underside of a lid, and a clean lid is the easiest control there is.
- Store it flat or standing on a long edge, since a lid left leaning against a wall takes a bow that never quite comes out.
- Four fitted vents: Each one opens on its own, so humidity steps down rather than drops.
Teknik Özellikler
- Finish
- Clear
- Weight
- 7.0 lb
Bunu projeniz için işe yarar hale getirelim.
Siparişinizde miktar, teslimat adresi, yetiştirme bölgesi ve varsa voltaj veya fiş gereksinimlerinizi belirtin. Özellikler, stok durumu, nakliye ve garanti koşulları yazılı teklifinizde teyit edilecektir.
Kaydedilen döviz kuru kullanılarak yapılan referans dönüşümü. 15 Kas 2026. Dönüştürülen tutarlar bir fiyat teklifi değildir.
KEŞFETMEYE DEVAM EDİN
Tüm ürünleri görüntüleMekanınız için daha fazla olanak
Hidroponik ve Sulama
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
Kaynak referansıTRY 11,081.34
Hidroponik ve Sulama
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
Kaynak referansıTRY 10,073.72
Hidroponik ve Sulama
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
Kaynak referansıTRY 9,569.90
Sorular ve tartışma
Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.