Before submitting, please go through these 3 quick checks
Check your connection setupWe’ve summarized the most common connection methods — please refer to the diagram for guidance.Here are two important details to double-check:
If you're using a G Series or SE Series grow light (with a display dimmer box):One end of the RJ12 cable should go into the UP port on the left side of the dimmer box (when facing it), and the other end should plug into the Light port of the Light & Clip Fan Combo Adapter.
The Light & Clip Fan Combo Adapter has 4 ports:One for the light, and one for the clip fan — be sure not to mix them up.
Make sure all firmware is up to date
Outdated firmware may cause connectivity or control issues. Please verify the following versions:
If you're using older versions, please update before submitting an issue.
Check your Wi-Fi signal strengthWeak or unstable network connections (e.g. in basements or garages) can affect device performance.Try testing your phone's Wi-Fi signal in the grow area — a strong and stable connection helps ensure proper operation.
GGS Power Strip Operating Manual>>>
GGS Controller Operating Manual >>>
Sorular ve tartışma
Bir sorunuz mu var veya paylaşmak istediğiniz faydalı bir şey mi? Sohbeti başlatın.