เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้
ตัวควบคุมและมิเตอร์สอบถามข้อมูลราคาส่ง
TrolMaster Sensor Bracket (2-pack)
รุ่น / รหัสสินค้า: TSB-1
How the TrolMaster TSB-1 Holds a Sensor
- Package size
- 85 x 68 x 67 mm
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
ราคาอ้างอิงแหล่งที่มาTHB 540.75
สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง
ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ
การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
How the TrolMaster TSB-1 Holds a Sensor
Product details
- This set contains two holders that work together to mount one sensor.
- TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
- Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
- Each holder fixes flat to a wall or post.
- Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
- The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
- That matters because a swinging sensor reads the air in a different spot from one minute to the next.
- The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
- The pack ships in a box about 85 x 68 x 67 mm.
- Placing a Sensor Mounting Bracket for Accurate Readings
- A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
- TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
- The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
- Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
- Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
- Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
- Seat the sensor and route its cable along the wall so it does not pull on the housing.
- Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
- In larger rooms, a set for each sensor keeps every reading consistent.
- Wipe dust off the sensor during routine cleaning.
- Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
- Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
- Two holders per pack: Together they mount one sensor.
- Curved locking edges: Hold the sensor firmly in place.
- Joinable design: Holders link with a mortise-and-tenon joint.
- Technical Specifications
ข้อกำหนด
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
- Mounting
- Wall mount, joinable holders
- Package size
- 85 x 68 x 67 mm
มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ
โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ
การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา
สำรวจต่อไป
ดูสินค้าทั้งหมดความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ
ตัวควบคุมและมิเตอร์
Yield Lab 8 Outlet 120v/240v Grow Light Relay Controller
แหล่งอ้างอิงTHB 3,047.62
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย