เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้
ตัวควบคุมและมิเตอร์สอบถามข้อมูลราคาส่ง
TrolMaster Replacement CO2 Sensor for Beta-8
รุ่น / รหัสสินค้า: SA-S8
What the TrolMaster SA-S8 Replaces in a BETA-8
- Type
- Replacement CO2 sensor head
- Compatible controller
- BETA-8 Digital CO2 PPM Controller
ราคาอ้างอิงแหล่งที่มาTHB 6,494.03
สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง
ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ
การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
What the TrolMaster SA-S8 Replaces in a BETA-8
Product details
- On a BETA-8 the controller is a box on a wall and the sensor is a head on a lead hanging near the canopy.
- Everything that actually measures sits in that head.
- The sensing element is NDIR, accurate to plus or minus fifty parts per million.
- It sits on a sixteen foot cable, with a photocell built into the same head.
- That photocell is what stops carbon dioxide injection during the dark period.
- So this part carries two functions rather than one, and losing it costs both the reading and the night behaviour.
- The head is the component that lives in the room rather than on the wall, which is why it is the part that wears.
- It sits in warm humid air, it collects dust, and it is the thing that gets knocked when a canopy is moved.
- Making it a service part is the right design, and it means a controller with a drifting reading does not become scrap.
- When an NDIR Head Needs Replacing Rather Than Cleaning
- Infrared measurement drifts slowly over years rather than failing outright, and that is what makes a bad sensor hard to spot.
- Watch for three particular patterns.
- A reading that never moves regardless of injection or ventilation is the clearest, because room levels always move.
- A figure that sits implausibly low while a regulator runs continuously points the same way.
- So does one that sits high while a room is being flushed.
- Cross-check with a separate meter before spending anything, since a controller arguing with itself costs less to diagnose than to replace.
- Dust on the head is worth clearing first, gently and dry.
- Where the photocell is the failing half, the symptom is different again and easy to misread as a control fault.
- Injection that never begins under lamps, or never stops in darkness, points at the light sensing side rather than the gas side.
- Function: The replacement remote sensor head for a BETA-8 controller
- Two jobs: It carries both the gas measurement and the photocell
- Accuracy: An NDIR element, accurate to plus or minus fifty parts per million
- Cable: A sixteen foot lead
- Why it wears: The head lives in warm humid air and collects dust
- Drift symptom: A reading that never moves whatever the room is doing
- Photocell symptom: Injection that never starts under lamps or never stops at night
- Before replacing: Cross-check against a separate meter and clear dust gently
- Service part: A drifting sensor does not force a whole controller replacement
ข้อกำหนด
- Type
- Replacement CO2 sensor head
- Compatible controller
- BETA-8 Digital CO2 PPM Controller
มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ
โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ
การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา
สำรวจต่อไป
ดูสินค้าทั้งหมดความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ
ตัวควบคุมและมิเตอร์
Yield Lab 8 Outlet 120v/240v Grow Light Relay Controller
แหล่งอ้างอิงTHB 3,047.62
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย