เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

อุปกรณ์ให้แสงสว่างสอบถามข้อมูลราคาส่ง

ThinkGrow Unit-Strut Hanger for Model-I & Plus

รุ่น / รหัสสินค้า: UH-2

ThinkGrow UH-2 Mounts Model-I Fixtures Directly to Unistrut

Compatible fixtures
ThinkGrow Model-I, Model-I Plus
Not compatible with
Model-H, Model-W, Model-V (use UH-1)
Made for Model-I
Fits ThinkGrow Model-I and Model-I Plus fixtures.
Direct Unistrut Mount
Fits standard 1-5/8 in metal framing channel.
ราคาอ้างอิงแหล่งที่มาTHB 643.74

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

ThinkGrow UH-2 Mounts Model-I Fixtures Directly to Unistrut

Product details

  • Commercial rooms built on Unistrut often skip ratchet hangers altogether.
  • The UH-2 lets a Model-I fixture hang straight from the channel.
  • It is made for the ThinkGrow Model-I and Model-I Plus LED fixtures.
  • It fits standard 1-5/8 in metal framing channel.
  • A quick release design lets the light come down for cleaning or service without loosening the strut hardware.
  • Mounting tight to the ceiling leaves more room between the fixture and the canopy.
  • That extra headroom helps in low rooms and multi-tier racks.
  • It is sold for Model-I rooms where fixtures hang from a strut grid.
  • Model-H, Model-W and Model-V fixtures use a different hanger, the UH-1.
  • No ceiling channel or anchors are included.
  • Installing a Model-I Unistrut Hanger
  • Lay out the strut so it lines up with the Model-I hanging points.
  • Confirm the channel and anchors are rated for the full fixture weight.
  • Attach a UH-2 at each hanging point the fixture manual specifies.
  • Raise the fixture and engage the quick release until it locks in place.
  • Check that the light is level before connecting power.
  • Route power and control cables away from the release mechanism.
  • To service the light, open the release and lower the fixture by hand.
  • The hanger holds a fixed height, so set canopy distance with dimming or bench height.
  • Overhead mounting in commercial rooms is handled by a licensed installer.
  • See the ThinkGrow Model-I Plus for a compatible fixture.
  • Made for Model-I: Fits ThinkGrow Model-I and Model-I Plus fixtures.
  • Direct Unistrut Mount: Fits standard 1-5/8 in metal framing channel.
  • Quick Release: Lowers the fixture for service without removing strut hardware.
  • Low-Ceiling Friendly: Keeps the light close to the ceiling.
  • Service Friendly: Quick release makes cleaning and maintenance faster.
  • Technical Specifications

ข้อกำหนด

Compatible fixtures
ThinkGrow Model-I, Model-I Plus
Not compatible with
Model-H, Model-W, Model-V (use UH-1)
Made for Model-I
Fits ThinkGrow Model-I and Model-I Plus fixtures.
Direct Unistrut Mount
Fits standard 1-5/8 in metal framing channel.

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Yield Lab Wing Reflector
อุปกรณ์ให้แสงสว่าง

Yield Lab Wing Reflector

แหล่งอ้างอิงTHB 1,353.56
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์