เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

การระบายอากาศและสภาพอากาศสอบถามข้อมูลราคาส่ง

Ruck 4 Back Draught Dampner

รุ่น / รหัสสินค้า: 148389

How the 4 Inch Back Draught Damper Seals an Idle Duct

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
ราคาอ้างอิงแหล่งที่มาTHB 609.86

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

How the 4 Inch Back Draught Damper Seals an Idle Duct

Product details

  • This is a one-way gate in the duct.
  • Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
  • The housing is galvanized sheet steel.
  • On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
  • Mounting a Backdraft Shutter in the Right Place
  • It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
  • Fit it downstream of the fan with the flaps opening in the direction of flow.
  • Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
  • Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
  • On a small run the flaps are light enough to open at low fan speed without stalling.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

ข้อกำหนด

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Yield Lab 6” Booster In-Line Duct Fan
การระบายอากาศและสภาพอากาศ

Yield Lab 6” Booster In-Line Duct Fan

แหล่งอ้างอิงTHB 777.58
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์