เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้
การระบายอากาศและสภาพอากาศสอบถามข้อมูลราคาส่ง
Ruck 12 Back Draught Dampner
รุ่น / รหัสสินค้า: 149477
How the 12 Inch Back Draught Damper Seals an Idle Duct
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
ราคาอ้างอิงแหล่งที่มาTHB 1,321.37
สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง
ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ
การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
How the 12 Inch Back Draught Damper Seals an Idle Duct
Product details
- At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
- The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
- Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
- Mounting a Backdraft Shutter in the Right Place
- Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
- Install it after the fan, flaps opening downstream.
- There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
- Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
- A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
ข้อกำหนด
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ
โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ
การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา
สำรวจต่อไป
ดูสินค้าทั้งหมดความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ
การระบายอากาศและสภาพอากาศ
Yield Lab 6 Inch Purifier Activated Charcoal Filter
แหล่งอ้างอิงTHB 5,080.50
การระบายอากาศและสภาพอากาศ
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
แหล่งอ้างอิงTHB 4,741.69
การระบายอากาศและสภาพอากาศ
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
แหล่งอ้างอิงTHB 4,064.06
การระบายอากาศและสภาพอากาศ
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
แหล่งอ้างอิงTHB 6,435.75
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย