เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้
การระบายอากาศและสภาพอากาศสอบถามข้อมูลราคาส่ง
Quest Duct Kit (Hi-E 195)
รุ่น / รหัสสินค้า: 4039132
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
ราคาอ้างอิงแหล่งที่มาTHB 6,268.04
สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง
ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ
การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
Product details
- This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
- A duct cover plate blocks off the opening the ducted setup no longer uses.
- Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
- Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
- The installation sheet for the kit is TS-1059, written for the Hi-E series.
- The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
- Nothing else is needed from the dehumidifier side.
- Flex or rigid duct in matching sizes completes the run.
- Why Growers Fit a Dehumidifier Duct Kit
- A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
- That keeps its heat and noise out of the room and frees floor space for plants.
- Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
- Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
- Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
- Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
- Plan the drain line at the same time, since a remote unit still needs a path for condensate.
- The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
- 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
- Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
- Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
- Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
- Technical Specifications
ข้อกำหนด
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ
โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ
การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา
สำรวจต่อไป
ดูสินค้าทั้งหมดความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ
การระบายอากาศและสภาพอากาศ
Yield Lab 6 Inch Purifier Activated Charcoal Filter
แหล่งอ้างอิงTHB 5,080.50
การระบายอากาศและสภาพอากาศ
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
แหล่งอ้างอิงTHB 4,741.69
การระบายอากาศและสภาพอากาศ
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
แหล่งอ้างอิงTHB 4,064.06
การระบายอากาศและสภาพอากาศ
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
แหล่งอ้างอิงTHB 6,435.75
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย