เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

การระบายอากาศและสภาพอากาศสอบถามข้อมูลราคาส่ง

Quest 335 Duct Kit

รุ่น / รหัสสินค้า: 4042685

What the Quest 335 Duct Kit Includes

Duct diameter
16 in
Compatible models
Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
Remote mounting
Run the unit from a mechanical room or ceiling.
ราคาอ้างอิงแหล่งที่มาTHB 14,399.55

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

What the Quest 335 Duct Kit Includes

Product details

  • This factory accessory converts a Quest 335 from a free-hanging unit into a ducted dehumidifier.
  • In the box are an intake duct adapter, a duct adapter face, a duct plenum face and an exhaust duct plenum.
  • Ten #10-24 hex-slotted screws and a 1/8 in drill bit come with it for fastening the parts to the cabinet.
  • Both connections take 16 in round duct.
  • Quest part number 4042685 fits the Quest 335 at 208/230 V (4042500) and at 277 V (4042600).
  • It also fits the 50 Hz Quest 375 (4046200-NC).
  • The 335 moves 900 CFM at 0.6 in WG with duct collars fitted, so the blower has pressure to spare for a short run.
  • That lets the dehumidifier sit in a mechanical room or above a ceiling while dry air still reaches the canopy.
  • Planning a Run With a Dehumidifier Duct Kit
  • A dehumidifier duct kit makes sense when room space is tight, or when the unit's noise and heat belong somewhere else.
  • Give each dehumidifier its own duct system rather than tying it into a fan or HVAC line.
  • Keep each run to about 25 ft and as straight as possible, since every elbow adds resistance.
  • Rigid pipe on a direct path holds airflow better than flex duct routed around obstacles.
  • Drill only within the safe zones shown in the Quest 335 manual so screws stay clear of coils and wiring.
  • Aim the discharge across the canopy or into a circulation path so dry air mixes instead of pooling.
  • Seal every joint with foil tape to stop the unit pulling in air from the plenum space.
  • Leave room to reach the end access panel, because the 22 x 20 x 2 in MERV-13 filter still needs regular changes.
  • Installed this way, the 335 keeps its rated capacity while staying out of the growing space.
  • 16 in connections: Round duct on both intake and discharge.
  • Complete hardware: Adapters, plenum, screws and drill bit included.
  • Factory fit: Quest part 4042685 for the Quest 335 cabinet.
  • Remote mounting: Run the unit from a mechanical room or ceiling.
  • Technical Specifications

ข้อกำหนด

Duct diameter
16 in
Compatible models
Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
Remote mounting
Run the unit from a mechanical room or ceiling.

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Yield Lab 6” Booster In-Line Duct Fan
การระบายอากาศและสภาพอากาศ

Yield Lab 6” Booster In-Line Duct Fan

แหล่งอ้างอิงTHB 777.58
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์