เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้
ระบบไฮโดรโปนิกส์และการชลประทานสอบถามข้อมูลราคาส่ง
Netafim Pulse Reed Switch
รุ่น / รหัสสินค้า: 70220-005300
What a Pulse Reed Switch Adds to a Water Meter
- Power Required
- None, passive switch
- Volume Per Pulse
- Determined by the water meter it is fitted to
- Volume per pulse is set by the meter
- Netafim meters ship in different pulse values, so check the register before you scale readings.
ราคาอ้างอิงแหล่งที่มาTHB 2,397.78
สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง
ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ
การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
What a Pulse Reed Switch Adds to a Water Meter
Product details
- A mechanical meter counts perfectly well and tells nobody.
- This register sits on the meter and adds an electrical output.
- No power is needed on the meter side, because the switch is passive.
- Reading the Water Meter Pulse Output at the Controller
- Any controller, datalogger or PLC with a digital input can take it, which is what makes a water meter pulse output so portable across equipment.
- The controller does the arithmetic: count the pulses, multiply by the volume each pulse represents, and you have consumption.
- That multiplier is set by the meter rather than by the switch, and Netafim meters are supplied in different pulse values.
- Check the register on the meter you are fitting, because getting that number wrong scales every reading you log.
- Two practical notes.
- Reed contacts are mechanical and they do eventually wear, which is the usual reason one gets replaced rather than a fault in the meter itself.
- And run the signal pair away from pump and light wiring, since a long unshielded run beside a contactor can pick up false counts.
- Passive, no power needed: The switch takes nothing on the meter side.
- The controller supplies the sensing circuit.
- Volume per pulse is set by the meter: Netafim meters ship in different pulse values, so check the register before you scale readings.
- A common replacement part: Reed contacts are mechanical and wear, which is usually why one is swapped.
- Keep the run clean: Route the signal pair away from pump and lighting wiring to avoid false counts.
- Technical Specifications
ข้อกำหนด
- Power Required
- None, passive switch
- Volume Per Pulse
- Determined by the water meter it is fitted to
- Volume per pulse is set by the meter
- Netafim meters ship in different pulse values, so check the register before you scale readings.
มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ
โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ
การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา
สำรวจต่อไป
ดูสินค้าทั้งหมดความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ
ระบบไฮโดรโปนิกส์และการชลประทาน
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
แหล่งอ้างอิงTHB 7,452.19
ระบบไฮโดรโปนิกส์และการชลประทาน
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
แหล่งอ้างอิงTHB 6,774.57
ระบบไฮโดรโปนิกส์และการชลประทาน
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
แหล่งอ้างอิงTHB 6,435.75
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย