เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

HydroLogic Evolution Wall Mount Bracket · Stainless, RO1000

รุ่น / รหัสสินค้า: 741585

What the Evolution Wall Mount Bracket Holds

Dimensions
11.375 W x 4.25 H x 6.1875 D in
Material
Stainless steel, heavy duty
Weight
1.122 lbs
Mounting Note
Fix to studs or anchors rated past the loaded system weight
ราคาอ้างอิงแหล่งที่มาTHB 3,115.72

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

What the Evolution Wall Mount Bracket Holds

Product details

  • A filter stack, off the floor.
  • It measures 11.375 by 4.25 by 6.1875 in and weighs 1.122 lbs.
  • It replaces the older HL 10057 part.
  • Why Heavy Duty Stainless Suits the Wall Behind an RO Unit
  • That wall gets wet and stays wet.
  • Plated steel rusts there, which is the whole reason for the material choice.
  • The more important number is not the bracket though.
  • It is what the bracket is screwed into.
  • Full of water an Evolution stack weighs far more than the bracket does.
  • The fixing carries the job: find studs, or use anchors rated well past the loaded weight.
  • Screws and washers come in the box, which is worth knowing because the ones most people reach for are plated.
  • Wall anchors are not included, since the right anchor depends on what you are drilling into.
  • HydroLogic describes the part as mounting an Evolution-RO to a variety of surfaces rather than naming one model.
  • It is not tied to the RO1000 alone.
  • Gets the system off the floor: Wall mounted, which is usually where an RO stack belongs.
  • Heavy duty stainless: The wall behind an RO unit stays wet.
  • Plated steel does not last.
  • Screws and washers included: The fasteners most people would otherwise grab are plated steel.
  • Replaces HL 10057: The older bracket part number, superseded by this one.
  • Not RO1000 only: HydroLogic describes it as mounting an Evolution-RO generally.
  • Anchors are not included: The right anchor depends on the wall, so that choice is yours.
  • Dimensions: 11.375 by 4.25 by 6.1875 in.
  • Technical Specifications

ข้อกำหนด

Material
Stainless steel, heavy duty
Dimensions
11.375 W x 4.25 H x 6.1875 D in
Weight
1.122 lbs
Mounting Note
Fix to studs or anchors rated past the loaded system weight

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Yield Lab Air Cool Tube Reflector
ระบบไฮโดรโปนิกส์และการชลประทาน

Yield Lab Air Cool Tube Reflector

แหล่งอ้างอิงTHB 3,386.44
Yield Lab Air Cool Tube Hood Reflector
ระบบไฮโดรโปนิกส์และการชลประทาน

Yield Lab Air Cool Tube Hood Reflector

แหล่งอ้างอิงTHB 3,725.25
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์