เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

Growlink SI Pulse Module

รุ่น / รหัสสินค้า: BMT-F-SI4 BACnet MS/TP

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
ราคาอ้างอิงแหล่งที่มาTHB 8,300.92

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Product details

  • The BMT-F-SI4 carries four S0 inputs that meet DIN EN 62053-31 Class A.
  • BACnet MS/TP reports the rolling count back to the Growlink controller.
  • The software converts pulses to gallons per minute, then trims pump runtime to land the exact injection volume each dose calls for.
  • BACnet MS/TP S0 Input with Retentive Counters and 500 Hz Capture
  • Pulse capture runs at 50 Hz through the Accumulator object and 500 Hz through the PulseConverter object.
  • A high-pulse flow meter on a fast-cycling pump stays accurate.
  • Retentive memory holds the last counter reading through a power blip.
  • That matters when a recipe spans a UPS swap or breaker trip.
  • Address and bit rate set with two rotary switches on the front.
  • A new module drops onto an existing trunk without bringing the BACnet line up on a laptop.
  • 4 × S0 pulse inputs (DIN EN 62053-31 Class A): Plug any S0-output flow or energy meter into the module.
  • BACnet MS/TP over a single trunk: Reports counter values back to the Growlink controller and any other BACnet client without protocol gateways.
  • 50 Hz Accumulator / 500 Hz PulseConverter: Two BACnet objects cover slow utility meters and fast injection-pump feedback on the same module.
  • Retentive counter memory: Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.
  • 2 front-panel rotary switches: Set BACnet address and bit rate without a laptop or DIP-switch acrobatics.
  • 24 V AC/DC supply with spring-clamp terminals: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
  • TH35 DIN rail mount: IEC 60715 rail snap-in keeps panels tidy alongside BMT-F-TO4, BMT-F-AOP4, or BMT-F-RTR.
  • Technical Specifications

ข้อกำหนด

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
Retentive counter memory
Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Zesty 7 Mild Pepper Seeds
การขยายพันธุ์และการดูแลต้นไม้

Zesty 7 Mild Pepper Seeds

แหล่งอ้างอิงTHB 33.88
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์