ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
Growlink LINKS HUB for Centralized 8-Port Device Control
Product details
- The Growlink LINKS HUB powers and communicates with up to eight LINK devices over standard RJ-45 cabling.
- Each port supplies up to 1A at 24VDC through the cable itself.
- Valves, relays, and sensor modules pull both data and power from the same line.
- The HUB itself runs 24VDC at 3W from the included AC/DC supply.
- Network connection uses Ethernet for primary uplink with Wi-Fi available as a backup channel to Growlink OS.
- Operating range covers 50–122°F (10–50°C) and 0–75% RH non-condensing, suitable for greenhouse and indoor cultivation.
- Wiring a Centralized Automation Hub for Multi-Device Grow Operations
- Plan the eight ports around device priority: HUB-required modules first (relayLINK and quadLINK), then optional-HUB devices (valveLINK, canopyLINK, lightLINK) that could otherwise run over Wi-Fi.
- Place the controller centrally to keep cable runs short and reduce voltage drop on the PoC line.
- The 1A-per-port budget is the constraint worth checking.
- A quadLINK and a relayLINK draw their own data current, while sensor hubs and valve drivers add their loads.
- For facilities needing more than eight devices, scale by adding additional HUB units in the same Growlink OS account.
- Each new HUB appears as a separate communication node in the dashboard.
- The trade-off is that every HUB needs its own Ethernet port.
- Plan switch capacity at the network layer before expanding past two or three HUBs per room.
- This is what the centralized automation hub design buys you — one network drop, one power supply, eight device channels.
- 8 RJ-45 Device Ports with PoC: Each port supplies up to 1A at 24VDC over the same cable that carries device data — fewer power supplies, cleaner wiring.
- Ethernet + Wi-Fi Network Connectivity: Plug into the local network over Ethernet for primary uplink or fall back to Wi-Fi when running tents or temporary spaces.
- Powers Every Wired LINK Device: Required for relayLINK and quadLINK, optional for valveLINK and canopyLINK; one HUB anchors the full LINKS deployment.
- Standalone or Multi-HUB Scaling: Run one HUB per room or add additional HUBs to the same Growlink OS account for larger facilities.
- Made in the USA: Built for greenhouse and indoor agricultural environments with serviceable construction.
- Technical Specifications
ข้อกำหนด
- Input Power
- 24VDC, 1A
- Power Consumption
- 3W
- Device Ports
- 8× RJ-45 (PoC up to 1A at 24VDC per port)
- Operating Temperature
- 50–122°F (10–50°C)
- Operating Humidity
- 0–75% RH (non-condensing)
- Dimensions
- 7.75" × 7.75" × 3.75"
- Compatibility
- All Growlink LINKS modules (relayLINK, quadLINK, valveLINK, canopyLINK, lightLINK, and more)
- Plan the eight ports around device priority
- HUB-required modules first (relayLINK and quadLINK), then optional-HUB devices (valveLINK, canopyLINK, lightLINK) that could otherwise run over Wi-Fi.
- Powers Every Wired LINK Device
- Required for relayLINK and quadLINK, optional for valveLINK and canopyLINK; one HUB anchors the full LINKS deployment.
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย