เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้
อุปกรณ์ให้แสงสว่างสอบถามข้อมูลราคาส่ง
Growlink HUB Connection Cable (3M)
รุ่น / รหัสสินค้า: HUB-CON-3M
Wiring the Growlink HUB Connection Cable into Your LINKS System
- HUB Power Budget
- Within 1A shared across 8 ports
- Length
- 3 m (9 ft 10 in)
- Connector
- RJ-45 (8P8C)
- Compatible Devices
- canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
ราคาอ้างอิงแหล่งที่มาTHB 338.47
สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง
ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ
การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
Wiring the Growlink HUB Connection Cable into Your LINKS System
Product details
- The Growlink HUB Connection Cable runs a 3-meter (9 ft 10 in) line between any compatible LINKS device and the LINKS 8-Port Device HUB.
- It uses 8-conductor RJ-45 straight-through wiring terminated on standard RJ-45 jacks at both ends.
- The single cable carries 24VDC power and Modbus data together.
- That keeps each device on one port instead of pulling power and signal on separate runs.
- The wiring matches what the HUB documentation calls out for every port, so any 8-conductor RJ-45 cable to that spec drops in.
- Planning Runs with a 3m LINKS Device RJ-45 Cable
- At 3 meters, the run covers most layouts where the HUB sits just outside a flower room.
- The device end can land on a canopy frame, controller wall, or substrate tray inside the space.
- Growers running the 8-Port Device HUB usually allocate one cable per LINK device port.
- The canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, and Batch TankLINK family all use this same connector.
- Each draws within the HUB's 1A power budget.
- If a sensor lands farther out, this Growlink HUB accessory pairs with another drop to bridge the gap.
- A single LINKS automation cable rarely reaches a far-corner device on its own in larger rooms.
- 3-Meter Length: Spans 9 ft 10 in from HUB port to device — long enough for most room-to-canopy runs.
- RJ-45 Straight-Through Wiring: Eight-conductor pinout matches every Growlink LINK device port and the HUB's documented spec.
- Power + Data on One Line: Delivers 24VDC and Modbus signal so each LINK draws everything from a single port.
- HUB-Native Connector: Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.
- Cultivation-Environment Build: Jacketing holds up to the temperature swings and humidity typical inside flower and veg rooms.
- Technical Specifications
ข้อกำหนด
- Length
- 3 m (9 ft 10 in)
- Connector
- RJ-45 (8P8C)
- HUB Power Budget
- Within 1A shared across 8 ports
- Compatible Devices
- canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
- HUB-Native Connector
- Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.
มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ
โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ
การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา
สำรวจต่อไป
ดูสินค้าทั้งหมดความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ
อุปกรณ์ให้แสงสว่าง
Yield Lab Professional Series Double Ended Grow Light Reflector
แหล่งอ้างอิงTHB 2,200.25
อุปกรณ์ให้แสงสว่าง
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
แหล่งอ้างอิงTHB 10,130.51
อุปกรณ์ให้แสงสว่าง
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
แหล่งอ้างอิงTHB 5,080.50
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย