เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

ตัวควบคุมและมิเตอร์สอบถามข้อมูลราคาส่ง

Growlink Batch TankLINK pH Sensor

รุ่น / รหัสสินค้า: GL-LINK-PHSENSOR

Reading Acidity with the Growlink Batch TankLINK pH Sensor

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
ราคาอ้างอิงแหล่งที่มาTHB 2,710.17

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

Reading Acidity with the Growlink Batch TankLINK pH Sensor

Product details

  • The Growlink Batch TankLINK pH Sensor reads nutrient solution acidity inside a batch tank or reservoir in real time.
  • The probe covers the full 0–14 pH range at ±0.02 pH accuracy with 0.01 pH resolution.
  • A 10-foot cable runs from the sensor to the Batch TankLINK controller.
  • The cable terminates on a BNC connector that pushes onto the controller port.
  • A quarter-turn clockwise locks it in place.
  • Inside the typical hydroponic feed window of 5.5–6.5 pH, that accuracy is tight enough to confirm a fresh batch lands inside spec on the first mix.
  • Calibrating and Maintaining the TankLINK pH Probe
  • Calibration is a two-point process with pH 7.00 and pH 4.01 buffer solutions.
  • The TankLINK LCD wizard walks the probe through each buffer in turn and locks the cal at a stable voltage.
  • Run cal at the start of each batch or whenever the reading drifts past ±0.05 pH between known mixes.
  • The pH probe ships in a storage cap of pH 4 buffer and potassium chloride.
  • The membrane needs to stay wet between runs.
  • A dry membrane is the fastest way to kill a pH probe early.
  • Keep the storage cap on whenever the sensor sits out of solution.
  • Plug-and-play wiring keeps a single-probe swap during teardown under a minute.
  • The nutrient tank pH probe twists out of the BNC port and a fresh one twists in.
  • 0–14 pH Range: Full-scale read covers anything a hydro feed will ever hit, including post-dosing spikes.
  • ±0.02 pH Accuracy: Tight enough to confirm fresh mixes land in the 5.5–6.5 feed window on the first measurement.
  • 0.01 pH Resolution: Catches small drifts between feeds before they show up as canopy stress symptoms.
  • BNC Connector with 1/4-Turn Lock: Push-on, twist-lock fit on the TankLINK controller's labeled port — no rewiring at swap.
  • Two-Point Calibration: pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.
  • Technical Specifications

ข้อกำหนด

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Compatible Controller
Growlink Batch TankLINK
Two-Point Calibration
pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Yield Lab Digital Thermo-Hygrometer
ตัวควบคุมและมิเตอร์

Yield Lab Digital Thermo-Hygrometer

แหล่งอ้างอิงTHB 269.36
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์