เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้
ระบบไฮโดรโปนิกส์และการชลประทานสอบถามข้อมูลราคาส่ง
AutoPot - easy2Propagate Lid
รุ่น / รหัสสินค้า: APWS210
What the AutoPot easy2Propagate Lid Covers
- Finish
- Clear
- Weight
- 7.0 lb
ราคาอ้างอิงแหล่งที่มาTHB 4,924.31
สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง
ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ
การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้
What the AutoPot easy2Propagate Lid Covers
Product details
- This is the lid on its own, sized to sit over the 47 by 21.5 in easy2Propagate garden tray.
- It is clear, so light reaches the cuttings and seedlings under it, and it weighs 7.0 lb.
- Four fitted vents are built into the top.
- Each vent opens and closes on its own, which is what gives the lid its range.
- All four shut, and the air under the lid holds the warmth and humidity a fresh cutting needs.
- One or two open, and the lid is letting a rooted plant start breathing room air.
- All four open, and it is a rain cover with airflow underneath.
- That adjustability is the whole argument for a lid over a tray rather than a loose sheet of plastic.
- Keep the vents closed at the start, targeting seventy to eighty degrees Fahrenheit and at least eighty percent humidity while roots form.
- Then they open gradually once seedlings or cuttings have rooted.
- A bench-length tray under a single lid is a lot of plants under one climate.
- It is the size that makes this a production piece rather than a windowsill one.
- The lid is the cover alone, part number APWS210.
- Running a Clear Propagator Lid Through a Rooting Cycle
- A clear propagator lid does its real work in the first week and its subtle work in the second.
- Fresh cuttings have no roots to replace the water their leaves lose, so the air around them has to stay close to saturated.
- Vents shut, lid on, and leave it alone.
- Condensation on the inside of the lid is the sign that the humidity is where it should be.
- Lift the lid once a day for a few seconds to change the air, then set it straight back.
- The second week is about letting go slowly.
- Open one vent the day the first roots show, another two days later, and work up to all four over a week.
- A cutting hardened off that way keeps growing.
- One moved from a sealed lid to open air in a single afternoon wilts, and some never recover from that wilt.
- Watch for a vent that is open but surrounded by heavy condensation, because that means the air is not moving through it.
- Wipe the inside of the lid between cycles with a mild sanitiser and rinse it well.
- Damping-off fungi live on the film that builds up on the underside of a lid, and a clean lid is the easiest control there is.
- Store it flat or standing on a long edge, since a lid left leaning against a wall takes a bow that never quite comes out.
- Four fitted vents: Each one opens on its own, so humidity steps down rather than drops.
ข้อกำหนด
- Finish
- Clear
- Weight
- 7.0 lb
มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ
โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ
การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา
สำรวจต่อไป
ดูสินค้าทั้งหมดความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ
ระบบไฮโดรโปนิกส์และการชลประทาน
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
แหล่งอ้างอิงTHB 7,452.19
ระบบไฮโดรโปนิกส์และการชลประทาน
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
แหล่งอ้างอิงTHB 6,774.57
ระบบไฮโดรโปนิกส์และการชลประทาน
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
แหล่งอ้างอิงTHB 6,435.75
คำถามและการอภิปราย
มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย