เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

AutoPot AirBase

รุ่น / รหัสสินค้า: APWS095

The AutoPot AirBase is a rigid ABS plastic plate that drops into the bottom of your pot and replaces the perlite, clay pebble, or hydroton drainage layer.

Product type
AutoPot Watering Systems
ราคาอ้างอิงแหล่งที่มาTHB 355.41

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

The AutoPot AirBase is a rigid ABS plastic plate that drops into the bottom of your pot and replaces the perlite, clay pebble, or hydroton drainage layer.

Product details

  • Skip the drainage layer entirely
  • It saves setup time, eliminates the need to pH-balance pebbles, and makes cleanup between runs significantly faster.
  • The center section pops out to accept an AirDome underneath for root zone aeration, but the AirBase works perfectly fine on its own.
  • Difficult to remove and clean between growing cycles
  • Clay pebbles break down over time, shedding dust and losing structure
  • Rebuying pebbles every few cycles adds up fast, especially across a multi-pot system
  • Drop it in the pot and you're done.
  • No rinsing, no pH work
  • Pull it out, rinse, and reuse run after run
  • Durable ABS plastic lasts for years across multiple grows
  • Replaces Pebble Layer Instantly
  • No more buying, rinsing, and pH-balancing clay pebbles or hydroton.
  • Drop the AirBase in the pot and move straight to filling with substrate.
  • AirDome Compatible
  • The center section pops out so the AirDome seats directly underneath.
  • Feed the airline through the notches on the AirBase underside and up the pot wall.
  • Tough ABS Plastic
  • Built to handle repeated use across multiple growing cycles.
  • Rinse it off between runs and it's ready to go again.
  • Two Shapes for Every System
  • Square fits 2.2 and 3.9 gallon plastic pots (1Pot and easy2grow systems).
  • Round fits 6.6 gallon XL pots and 3 or 5 gallon GeoPot fabric pots.
  • Faster Cleanup
  • At the end of a cycle, pull the AirBase out of the pot in one piece.
  • No fishing out hundreds of loose pebbles from spent substrate.
  • Not for XXL Systems
  • AirBases are designed for pots up to 6.6 gallons.
  • The 9 and 13 gallon XXL fabric pots do not use a drainage layer and have no AirBase equivalent.
  • How to install the AirBase

ข้อกำหนด

Product type
AutoPot Watering Systems

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Yield Lab Air Cool Tube Reflector
ระบบไฮโดรโปนิกส์และการชลประทาน

Yield Lab Air Cool Tube Reflector

แหล่งอ้างอิงTHB 3,386.44
Yield Lab Air Cool Tube Hood Reflector
ระบบไฮโดรโปนิกส์และการชลประทาน

Yield Lab Air Cool Tube Hood Reflector

แหล่งอ้างอิงTHB 3,725.25
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์