เส้นทางการเติบโตที่สดใสกว่าเดิม ขายส่งตรงจากโรงงาน ประสบการณ์ที่สั่งสมมามากกว่า 15 ปี

เนื้อหานี้มีให้บริการในภาษาต้นฉบับในขณะนี้

การระบายอากาศและสภาพอากาศสอบถามข้อมูลราคาส่ง

4 inch Backdraft Damper

รุ่น / รหัสสินค้า: VTBDD4

What a 4 inch Backdraft Damper Is Stopping

Duct size
Four inches, matching a four inch inline fan or run
Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
ราคาอ้างอิงแหล่งที่มาTHB 812.47

สำหรับใช้เปรียบเทียบเท่านั้น กรุณาสอบถามราคาส่งปัจจุบัน ความพร้อมจำหน่าย และเงื่อนไขการจัดส่ง

ไม่ต้องจ่ายเงิน เพียงแค่พูดคุยเกี่ยวกับสิ่งที่คุณต้องการ

การสนับสนุนโดยตรงจากโรงงานประสบการณ์มากกว่า 15 ปี
ดูรายละเอียดเพิ่มเติม

ข้อมูลเพิ่มเติมเกี่ยวกับผลิตภัณฑ์นี้

What a 4 inch Backdraft Damper Is Stopping

Product details

  • A duct with nothing in it is a two way street.
  • When the fan is off, outside air walks back down the run, bringing cold, smell and whatever is living in the roof space with it.
  • On a sealed room it also breaks the pressure relationship you built the extraction around.
  • A backdraft damper closes that street in one direction.
  • Two blades sit inside the body, each on its own independent hinge.
  • That independence is the design detail worth paying for, because a single shared shaft means one sticky blade holds the other open.
  • The body is galvanized steel and the whole assembly pushes into the duct, so there is no flange to fit and no transition to build.
  • It installs in any orientation.
  • The blades close onto a neoprene perimeter seal rather than metal onto metal, which is what makes the closure quiet as well as tight.
  • Why Static Pressure Decides Whether It Opens at All
  • One figure matters more on a small duct than anywhere else.
  • The blades need between four and eight hundredths of an inch of static pressure before they lift.
  • That is not very much pressure at all.
  • A small fan at the end of a long flexible run, with a loaded carbon filter in front of it, does not always make it.
  • The symptom is a fan that runs while nothing moves, and the cause looks like a dead fan rather than a shut damper.
  • Two habits between them avoid it entirely.
  • Keep the run short and use rigid duct where the layout allows, since flexible duct costs several times the resistance for the same length.
  • Second, check the damper by hand at commissioning with the fan at its lowest intended speed rather than at full.
  • A unit that will be run at thirty percent overnight needs to open at thirty percent.
  • The damper is sized for a four inch duct and suits the smaller Vortex in-line fans.
  • Duct size: Four inches, matching a four inch inline fan or run
  • Function: Stops air travelling back down the duct when the fan is off
  • Blades: Two, each on an independent hinge so neither can jam the other
  • Seal: A neoprene perimeter gasket rather than metal onto metal
  • Noise: That gasket is what makes the closure quiet as well as tight
  • Body: Galvanized steel throughout the housing and both blades
  • Mounting: The whole assembly inserts into the duct, with no flange to fit
  • Orientation: Installs in any position

ข้อกำหนด

Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Duct size
Four inches, matching a four inch inline fan or run
Noise
That gasket is what makes the closure quiet as well as tight

มาทำให้มันใช้งานได้กับโปรเจ็กต์ของคุณกันเถอะ

โปรดระบุจำนวนสินค้า สถานที่จัดส่ง พื้นที่เพาะปลูก และแรงดันไฟฟ้าหรือประเภทปลั๊กที่ต้องการในคำสอบถามของคุณ ข้อมูลจำเพาะ ความพร้อมจำหน่าย การจัดส่ง และเงื่อนไขการรับประกันจะได้รับการยืนยันในใบเสนอราคาที่เป็นลายลักษณ์อักษรของคุณ

การแปลงอ้างอิงโดยใช้อัตราแลกเปลี่ยนที่บันทึกไว้ ณ วันที่ 15 พ.ย. 2026. จำนวนเงินที่แปลงแล้วไม่ใช่ใบเสนอราคา

เรามาเติบโตไปด้วยกัน

คำถามและการอภิปราย

0

มีคำถามหรือสิ่งที่มีประโยชน์อยากแบ่งปันไหม? เริ่มการสนทนาได้เลย

สำรวจต่อไป

ความเป็นไปได้เพิ่มเติมสำหรับพื้นที่ของคุณ

ดูสินค้าทั้งหมด
Yield Lab 6” Booster In-Line Duct Fan
การระบายอากาศและสภาพอากาศ

Yield Lab 6” Booster In-Line Duct Fan

แหล่งอ้างอิงTHB 777.58
จุดเริ่มต้นของสิ่งที่ดี

มาทำให้โครงการของคุณเป็นจริงกันเถอะ

โปรดบอกรายละเอียดเกี่ยวกับสิ่งที่คุณต้องการ เราจะใช้ข้อมูลของคุณเพื่อเตรียมข้อเสนอราคาส่งที่เหมาะสม

รายการสินค้าของคุณ

ไม่ต้องจ่ายเงิน ไม่มีข้อผูกมัด แค่เป็นการสนทนาที่เป็นประโยชน์