Более эффективный способ развития. Оптовая торговля напрямую с завода. Более 15 лет опыта и профессиональных навыков.

Данный контент в настоящее время доступен на языке оригинала.

Контроллеры и измерительные приборыЗапрос на оптовую продажу

TrolMaster Sensor Bracket (2-pack)

Модель / Артикул: TSB-1

How the TrolMaster TSB-1 Holds a Sensor

Package size
85 x 68 x 67 mm
Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
Исходная справочная ценаRUB 1,315.55

Только для сравнения. Запросите актуальную оптовую цену, наличие товара и условия доставки.

Оплата не требуется. Обсуждение ваших потребностей.

Прямая заводская поддержкаБолее 15 лет опыта
БОЛЕЕ ПОДРОБНЫЙ ВЗГЛЯД

Немного подробнее об этом продукте

How the TrolMaster TSB-1 Holds a Sensor

Product details

  • This set contains two holders that work together to mount one sensor.
  • TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
  • Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
  • Each holder fixes flat to a wall or post.
  • Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
  • The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
  • That matters because a swinging sensor reads the air in a different spot from one minute to the next.
  • The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
  • The pack ships in a box about 85 x 68 x 67 mm.
  • Placing a Sensor Mounting Bracket for Accurate Readings
  • A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
  • TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
  • The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
  • Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
  • Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
  • Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
  • Seat the sensor and route its cable along the wall so it does not pull on the housing.
  • Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
  • In larger rooms, a set for each sensor keeps every reading consistent.
  • Wipe dust off the sensor during routine cleaning.
  • Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
  • Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
  • Two holders per pack: Together they mount one sensor.
  • Curved locking edges: Hold the sensor firmly in place.
  • Joinable design: Holders link with a mortise-and-tenon joint.
  • Technical Specifications

Технические характеристики

Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
Mounting
Wall mount, joinable holders
Package size
85 x 68 x 67 mm

Давайте это используем в вашем проекте.

В запросе укажите необходимое количество, место доставки, регион выращивания, а также требуемое напряжение и тип вилки. Технические характеристики, наличие, условия доставки и гарантии будут подтверждены в вашем письменном предложении.

Конвертация с использованием сохраненного обменного курса на определенную дату. 15 нояб. 2026 г.. Указанные суммы в пересчете не являются ценовым предложением.

Давайте расти вместе!

Вопросы и обсуждение

0

У вас есть вопрос или что-то полезное, чем вы хотите поделиться? Начните разговор.

ПРОДОЛЖАЙТЕ ИССЛЕДОВАТЬ

Больше возможностей для вашего пространства

Посмотреть все товары
НАЧАЛО ЧЕГО-ТО ХОРОШЕГО

Давайте представим ваш проект публике.

Расскажите нам немного о ваших потребностях. Мы используем ваши данные для подготовки соответствующего оптового предложения.

Ваш список товаров

Без оплаты. Без каких-либо обязательств. Просто полезная беседа.