Данный контент в настоящее время доступен на языке оригинала.
Вентиляция и климатЗапрос на оптовую продажу
Ruck 8 Back Draught Dampner
Модель / Артикул: 149394
How the 8 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Исходная справочная ценаRUB 1,895.84
Только для сравнения. Запросите актуальную оптовую цену, наличие товара и условия доставки.
Оплата не требуется. Обсуждение ваших потребностей.
Прямая заводская поддержкаБолее 15 лет опыта
БОЛЕЕ ПОДРОБНЫЙ ВЗГЛЯД
Немного подробнее об этом продукте
How the 8 Inch Back Draught Damper Seals an Idle Duct
Product details
- Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
- The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
- On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
- Mounting a Backdraft Shutter in the Right Place
- Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
- Put it downstream of the fan with the flaps opening the way the air goes.
- The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
- Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
- If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
- Nudge the speed up a step.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Технические характеристики
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Давайте это используем в вашем проекте.
В запросе укажите необходимое количество, место доставки, регион выращивания, а также требуемое напряжение и тип вилки. Технические характеристики, наличие, условия доставки и гарантии будут подтверждены в вашем письменном предложении.
Конвертация с использованием сохраненного обменного курса на определенную дату. 15 нояб. 2026 г.. Указанные суммы в пересчете не являются ценовым предложением.
ПРОДОЛЖАЙТЕ ИССЛЕДОВАТЬ
Посмотреть все товарыБольше возможностей для вашего пространства
Вентиляция и климат
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
ИсточникRUB 11,535.80
Вентиляция и климат
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
ИсточникRUB 9,887.24
Вопросы и обсуждение
У вас есть вопрос или что-то полезное, чем вы хотите поделиться? Начните разговор.