Данный контент в настоящее время доступен на языке оригинала.
Вентиляция и климатЗапрос на оптовую продажу
Ruck 4 Back Draught Dampner
Модель / Артикул: 148389
How the 4 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Исходная справочная ценаRUB 1,483.70
Только для сравнения. Запросите актуальную оптовую цену, наличие товара и условия доставки.
Оплата не требуется. Обсуждение ваших потребностей.
Прямая заводская поддержкаБолее 15 лет опыта
БОЛЕЕ ПОДРОБНЫЙ ВЗГЛЯД
Немного подробнее об этом продукте
How the 4 Inch Back Draught Damper Seals an Idle Duct
Product details
- This is a one-way gate in the duct.
- Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
- The housing is galvanized sheet steel.
- On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
- Mounting a Backdraft Shutter in the Right Place
- It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
- Fit it downstream of the fan with the flaps opening in the direction of flow.
- Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
- Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
- On a small run the flaps are light enough to open at low fan speed without stalling.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Технические характеристики
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Давайте это используем в вашем проекте.
В запросе укажите необходимое количество, место доставки, регион выращивания, а также требуемое напряжение и тип вилки. Технические характеристики, наличие, условия доставки и гарантии будут подтверждены в вашем письменном предложении.
Конвертация с использованием сохраненного обменного курса на определенную дату. 15 нояб. 2026 г.. Указанные суммы в пересчете не являются ценовым предложением.
ПРОДОЛЖАЙТЕ ИССЛЕДОВАТЬ
Посмотреть все товарыБольше возможностей для вашего пространства
Вентиляция и климат
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
ИсточникRUB 11,535.80
Вентиляция и климат
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
ИсточникRUB 9,887.24
Вопросы и обсуждение
У вас есть вопрос или что-то полезное, чем вы хотите поделиться? Начните разговор.