Более эффективный способ развития. Оптовая торговля напрямую с завода. Более 15 лет опыта и профессиональных навыков.

Данный контент в настоящее время доступен на языке оригинала.

Вентиляция и климатЗапрос на оптовую продажу

Quest Duct Kit (Hi-E 195)

Модель / Артикул: 4039132

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Исходная справочная ценаRUB 15,249.18

Только для сравнения. Запросите актуальную оптовую цену, наличие товара и условия доставки.

Оплата не требуется. Обсуждение ваших потребностей.

Прямая заводская поддержкаБолее 15 лет опыта
БОЛЕЕ ПОДРОБНЫЙ ВЗГЛЯД

Немного подробнее об этом продукте

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Product details

  • This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
  • A duct cover plate blocks off the opening the ducted setup no longer uses.
  • Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
  • Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
  • The installation sheet for the kit is TS-1059, written for the Hi-E series.
  • The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
  • Nothing else is needed from the dehumidifier side.
  • Flex or rigid duct in matching sizes completes the run.
  • Why Growers Fit a Dehumidifier Duct Kit
  • A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
  • That keeps its heat and noise out of the room and frees floor space for plants.
  • Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
  • Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
  • Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
  • Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
  • Plan the drain line at the same time, since a remote unit still needs a path for condensate.
  • The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
  • 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
  • Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
  • Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
  • Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
  • Technical Specifications

Технические характеристики

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)

Давайте это используем в вашем проекте.

В запросе укажите необходимое количество, место доставки, регион выращивания, а также требуемое напряжение и тип вилки. Технические характеристики, наличие, условия доставки и гарантии будут подтверждены в вашем письменном предложении.

Конвертация с использованием сохраненного обменного курса на определенную дату. 15 нояб. 2026 г.. Указанные суммы в пересчете не являются ценовым предложением.

Давайте расти вместе!

Вопросы и обсуждение

0

У вас есть вопрос или что-то полезное, чем вы хотите поделиться? Начните разговор.

ПРОДОЛЖАЙТЕ ИССЛЕДОВАТЬ

Больше возможностей для вашего пространства

Посмотреть все товары
НАЧАЛО ЧЕГО-ТО ХОРОШЕГО

Давайте представим ваш проект публике.

Расскажите нам немного о ваших потребностях. Мы используем ваши данные для подготовки соответствующего оптового предложения.

Ваш список товаров

Без оплаты. Без каких-либо обязательств. Просто полезная беседа.