Более эффективный способ развития. Оптовая торговля напрямую с завода. Более 15 лет опыта и профессиональных навыков.

Данный контент в настоящее время доступен на языке оригинала.

Осветительные аксессуарыЗапрос на оптовую продажу

Quest 70 Pint - Hanging Bracket Kit

Модель / Артикул: 4036695

Everything in the Quest 70 Hanging Kit, Item by Item

Bracket dimensions
16.50 x 2.19 x 1.00 in
Bracket shape
L-shaped, cut to hug the unit
Mounting
Eyebolts into structure, not drywall or a suspended grid
Two L-shaped brackets
16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
Исходная справочная ценаRUB 10,962.92

Только для сравнения. Запросите актуальную оптовую цену, наличие товара и условия доставки.

Оплата не требуется. Обсуждение ваших потребностей.

Прямая заводская поддержкаБолее 15 лет опыта
БОЛЕЕ ПОДРОБНЫЙ ВЗГЛЯД

Немного подробнее об этом продукте

Everything in the Quest 70 Hanging Kit, Item by Item

Product details

  • The Quest 70 hanging kit carries five distinct parts.
  • Two brackets, four eyebolts, four cables with carabiners, and a quarter inch clip on 8 ft of nylon rope.
  • That rope and clip are the two pieces most often left off a parts list.
  • They are what the kit uses for the drain line rather than for the unit itself.
  • The brackets are the part worth understanding.
  • They are L-shaped and measure 16.50 by 2.19 by 1.00 in, and they are cut to hug the body of the machine rather than to bolt through it.
  • Two of them take the load and the four cables carry it up to the eyebolts.
  • That is a four point suspension, which is what keeps a dehumidifier level when it is running.
  • Level matters more on a dehumidifier than on a fan.
  • The condensate has to reach the drain.
  • A unit hanging a few degrees out holds water in the pan and eventually pushes it somewhere else.
  • Set the four cables to equal length before the machine goes up, not after.
  • What to Check Before Fitting a Dehumidifier Ceiling Mount
  • Fitment first, because this kit is model specific in a way the part name does not say.
  • It fits the Quest 70, part 4033750, and the Quest 70 50-Hz build, part 4033810, and nothing else.
  • The larger Quest units take a different overhead bracket under its own part number.
  • Second, the structure above the machine.
  • The ceiling has to be verified against the operating weight of the machine.
  • Eyebolts go into structure, never into drywall or a suspended grid, so find the joists first.
  • Third on the list comes the drain.
  • A hanging unit has to gravity-feed its condensate somewhere, and that line needs a continuous fall from the machine to wherever it goes.
  • Work that path out before the eyebolts go in, because moving a drain afterwards means moving the machine.
  • Part 4036695: The part number for this kit specifically.
  • Two L-shaped brackets: 16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.
  • Four cables with carabiners: A four point suspension, which is what holds the unit level.
  • Four eyebolts: Into structure rather than drywall or a suspended ceiling grid.
  • Clip and 8 ft of nylon rope: Included in the kit, and the piece most often overlooked.
  • Quest 70 only: Parts 4033750 and 4033810; larger units take a different bracket.

Технические характеристики

Bracket shape
L-shaped, cut to hug the unit
Bracket dimensions
16.50 x 2.19 x 1.00 in
Mounting
Eyebolts into structure, not drywall or a suspended grid
Two L-shaped brackets
16.50 by 2.19 by 1.00 in, cut to hug the body of the unit.

Давайте это используем в вашем проекте.

В запросе укажите необходимое количество, место доставки, регион выращивания, а также требуемое напряжение и тип вилки. Технические характеристики, наличие, условия доставки и гарантии будут подтверждены в вашем письменном предложении.

Конвертация с использованием сохраненного обменного курса на определенную дату. 15 нояб. 2026 г.. Указанные суммы в пересчете не являются ценовым предложением.

Давайте расти вместе!

Вопросы и обсуждение

0

У вас есть вопрос или что-то полезное, чем вы хотите поделиться? Начните разговор.

ПРОДОЛЖАЙТЕ ИССЛЕДОВАТЬ

Больше возможностей для вашего пространства

Посмотреть все товары
Yield Lab Wing Reflector
Осветительные аксессуары

Yield Lab Wing Reflector

ИсточникRUB 3,293.00
НАЧАЛО ЧЕГО-ТО ХОРОШЕГО

Давайте представим ваш проект публике.

Расскажите нам немного о ваших потребностях. Мы используем ваши данные для подготовки соответствующего оптового предложения.

Ваш список товаров

Без оплаты. Без каких-либо обязательств. Просто полезная беседа.