Более эффективный способ развития. Оптовая торговля напрямую с завода. Более 15 лет опыта и профессиональных навыков.

Данный контент в настоящее время доступен на языке оригинала.

Гидропоника и орошениеЗапрос на оптовую продажу

Netafim Pulse Reed Switch

Модель / Артикул: 70220-005300

What a Pulse Reed Switch Adds to a Water Meter

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.
Исходная справочная ценаRUB 5,833.43

Только для сравнения. Запросите актуальную оптовую цену, наличие товара и условия доставки.

Оплата не требуется. Обсуждение ваших потребностей.

Прямая заводская поддержкаБолее 15 лет опыта
БОЛЕЕ ПОДРОБНЫЙ ВЗГЛЯД

Немного подробнее об этом продукте

What a Pulse Reed Switch Adds to a Water Meter

Product details

  • A mechanical meter counts perfectly well and tells nobody.
  • This register sits on the meter and adds an electrical output.
  • No power is needed on the meter side, because the switch is passive.
  • Reading the Water Meter Pulse Output at the Controller
  • Any controller, datalogger or PLC with a digital input can take it, which is what makes a water meter pulse output so portable across equipment.
  • The controller does the arithmetic: count the pulses, multiply by the volume each pulse represents, and you have consumption.
  • That multiplier is set by the meter rather than by the switch, and Netafim meters are supplied in different pulse values.
  • Check the register on the meter you are fitting, because getting that number wrong scales every reading you log.
  • Two practical notes.
  • Reed contacts are mechanical and they do eventually wear, which is the usual reason one gets replaced rather than a fault in the meter itself.
  • And run the signal pair away from pump and light wiring, since a long unshielded run beside a contactor can pick up false counts.
  • Passive, no power needed: The switch takes nothing on the meter side.
  • The controller supplies the sensing circuit.
  • Volume per pulse is set by the meter: Netafim meters ship in different pulse values, so check the register before you scale readings.
  • A common replacement part: Reed contacts are mechanical and wear, which is usually why one is swapped.
  • Keep the run clean: Route the signal pair away from pump and lighting wiring to avoid false counts.
  • Technical Specifications

Технические характеристики

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.

Давайте это используем в вашем проекте.

В запросе укажите необходимое количество, место доставки, регион выращивания, а также требуемое напряжение и тип вилки. Технические характеристики, наличие, условия доставки и гарантии будут подтверждены в вашем письменном предложении.

Конвертация с использованием сохраненного обменного курса на определенную дату. 15 нояб. 2026 г.. Указанные суммы в пересчете не являются ценовым предложением.

Давайте расти вместе!

Вопросы и обсуждение

0

У вас есть вопрос или что-то полезное, чем вы хотите поделиться? Начните разговор.

ПРОДОЛЖАЙТЕ ИССЛЕДОВАТЬ

Больше возможностей для вашего пространства

Посмотреть все товары
НАЧАЛО ЧЕГО-ТО ХОРОШЕГО

Давайте представим ваш проект публике.

Расскажите нам немного о ваших потребностях. Мы используем ваши данные для подготовки соответствующего оптового предложения.

Ваш список товаров

Без оплаты. Без каких-либо обязательств. Просто полезная беседа.