Более эффективный способ развития. Оптовая торговля напрямую с завода. Более 15 лет опыта и профессиональных навыков.

Данный контент в настоящее время доступен на языке оригинала.

Вентиляция и климатЗапрос на оптовую продажу

4 inch Backdraft Damper

Модель / Артикул: VTBDD4

What a 4 inch Backdraft Damper Is Stopping

Duct size
Four inches, matching a four inch inline fan or run
Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Исходная справочная ценаRUB 1,976.62

Только для сравнения. Запросите актуальную оптовую цену, наличие товара и условия доставки.

Оплата не требуется. Обсуждение ваших потребностей.

Прямая заводская поддержкаБолее 15 лет опыта
БОЛЕЕ ПОДРОБНЫЙ ВЗГЛЯД

Немного подробнее об этом продукте

What a 4 inch Backdraft Damper Is Stopping

Product details

  • A duct with nothing in it is a two way street.
  • When the fan is off, outside air walks back down the run, bringing cold, smell and whatever is living in the roof space with it.
  • On a sealed room it also breaks the pressure relationship you built the extraction around.
  • A backdraft damper closes that street in one direction.
  • Two blades sit inside the body, each on its own independent hinge.
  • That independence is the design detail worth paying for, because a single shared shaft means one sticky blade holds the other open.
  • The body is galvanized steel and the whole assembly pushes into the duct, so there is no flange to fit and no transition to build.
  • It installs in any orientation.
  • The blades close onto a neoprene perimeter seal rather than metal onto metal, which is what makes the closure quiet as well as tight.
  • Why Static Pressure Decides Whether It Opens at All
  • One figure matters more on a small duct than anywhere else.
  • The blades need between four and eight hundredths of an inch of static pressure before they lift.
  • That is not very much pressure at all.
  • A small fan at the end of a long flexible run, with a loaded carbon filter in front of it, does not always make it.
  • The symptom is a fan that runs while nothing moves, and the cause looks like a dead fan rather than a shut damper.
  • Two habits between them avoid it entirely.
  • Keep the run short and use rigid duct where the layout allows, since flexible duct costs several times the resistance for the same length.
  • Second, check the damper by hand at commissioning with the fan at its lowest intended speed rather than at full.
  • A unit that will be run at thirty percent overnight needs to open at thirty percent.
  • The damper is sized for a four inch duct and suits the smaller Vortex in-line fans.
  • Duct size: Four inches, matching a four inch inline fan or run
  • Function: Stops air travelling back down the duct when the fan is off
  • Blades: Two, each on an independent hinge so neither can jam the other
  • Seal: A neoprene perimeter gasket rather than metal onto metal
  • Noise: That gasket is what makes the closure quiet as well as tight
  • Body: Galvanized steel throughout the housing and both blades
  • Mounting: The whole assembly inserts into the duct, with no flange to fit
  • Orientation: Installs in any position

Технические характеристики

Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Duct size
Four inches, matching a four inch inline fan or run
Noise
That gasket is what makes the closure quiet as well as tight

Давайте это используем в вашем проекте.

В запросе укажите необходимое количество, место доставки, регион выращивания, а также требуемое напряжение и тип вилки. Технические характеристики, наличие, условия доставки и гарантии будут подтверждены в вашем письменном предложении.

Конвертация с использованием сохраненного обменного курса на определенную дату. 15 нояб. 2026 г.. Указанные суммы в пересчете не являются ценовым предложением.

Давайте расти вместе!

Вопросы и обсуждение

0

У вас есть вопрос или что-то полезное, чем вы хотите поделиться? Начните разговор.

ПРОДОЛЖАЙТЕ ИССЛЕДОВАТЬ

Больше возможностей для вашего пространства

Посмотреть все товары
НАЧАЛО ЧЕГО-ТО ХОРОШЕГО

Давайте представим ваш проект публике.

Расскажите нам немного о ваших потребностях. Мы используем ваши данные для подготовки соответствующего оптового предложения.

Ваш список товаров

Без оплаты. Без каких-либо обязательств. Просто полезная беседа.