Uma forma mais inteligente de crescer. Venda por atacado direto da fábrica. Mais de 15 anos de crescente experiência

Este conteúdo está disponível atualmente em seu idioma original.

Controladores e MedidoresConsulta de atacado

TrolMaster Sensor Bracket (2-pack)

Modelo / SKU: TSB-1

How the TrolMaster TSB-1 Holds a Sensor

Package size
85 x 68 x 67 mm
Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
Preço de referência da fonteEUR 14.46

Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.

Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.

Suporte direto da fábricaMais de 15 anos de experiência
UMA ANÁLISE MAIS DETALHADA

Um pouco mais sobre este produto

How the TrolMaster TSB-1 Holds a Sensor

Product details

  • This set contains two holders that work together to mount one sensor.
  • TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
  • Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
  • Each holder fixes flat to a wall or post.
  • Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
  • The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
  • That matters because a swinging sensor reads the air in a different spot from one minute to the next.
  • The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
  • The pack ships in a box about 85 x 68 x 67 mm.
  • Placing a Sensor Mounting Bracket for Accurate Readings
  • A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
  • TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
  • The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
  • Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
  • Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
  • Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
  • Seat the sensor and route its cable along the wall so it does not pull on the housing.
  • Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
  • In larger rooms, a set for each sensor keeps every reading consistent.
  • Wipe dust off the sensor during routine cleaning.
  • Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
  • Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
  • Two holders per pack: Together they mount one sensor.
  • Curved locking edges: Hold the sensor firmly in place.
  • Joinable design: Holders link with a mortise-and-tenon joint.
  • Technical Specifications

Especificações

Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
Mounting
Wall mount, joinable holders
Package size
85 x 68 x 67 mm

Vamos fazer isso funcionar para o seu projeto.

Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.

Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.

VAMOS CRESCER JUNTOS

Perguntas e discussão

0

Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.

CONTINUE EXPLORANDO

Mais possibilidades para o seu espaço

Ver todos os produtos
O INÍCIO DE ALGO BOM

Vamos dar visibilidade ao seu projeto.

Conte-nos um pouco sobre suas necessidades. Usaremos suas informações para preparar uma proposta de atacado adequada.

Sua lista de produtos

Sem pagamento. Sem compromisso. Apenas uma conversa útil.