Este conteúdo está disponível atualmente em seu idioma original.
Trolmaster 1.5 Digital Flow Meter
Modelo / SKU: DFM-3
This meter installs inline on a 1.5 in water or nutrient main.
- Pipe size
- 1.5 in
- Package size
- 255 x 135 x 80 mm
- Model
- DFM-3
- Flow range
- 1.32 to 39.62 GPM (5 to 150 L/min)
Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.
Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.
Um pouco mais sobre este produto
This meter installs inline on a 1.5 in water or nutrient main.
Product details
- What the TrolMaster DFM-3 Reads
- It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
- A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
- The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
- It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
- With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
- The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
- It is rated to 250 psi and works from 32 to 122 °F.
- The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
- Placing a 1.5 Inch Flow Meter on a Main Line
- A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
- Install it downstream of the pump and filter, before the line branches to the zone valves.
- Orient it with the direction of flow and support heavy pipe on both sides of the meter.
- Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
- Keep the LCD facing the walkway so readings can be checked on every round.
- Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
- Enter each zone's target volume and confirm the first totals with a measured fill.
- A total that climbs on an unchanged program points to a leak worth chasing.
- A total that falls often means filters or drippers need attention.
- Flush the pipework before installation so debris does not catch inside the meter.
- Installed with care, it keeps large rooms on a consistent, measurable feed.
- 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
- On-board LCD: Live flow rate and total volume at the pipe.
- Feed by Volume: Aqua-X Pro doses each cycle by gallons.
- Technical Specifications
Especificações
- Model
- DFM-3
- Pipe size
- 1.5 in
- Flow range
- 1.32 to 39.62 GPM (5 to 150 L/min)
- Output
- Flow rate and total volume
- Compatible controller
- Aqua-X Pro (direct or via SPH-1 hub)
- Certifications
- CE, FCC, ETL
- Package size
- 255 x 135 x 80 mm
- Gross weight
- 1.37 lb
- Feed by Volume
- Aqua-X Pro doses each cycle by gallons.
Vamos fazer isso funcionar para o seu projeto.
Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.
Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.
Mais possibilidades para o seu espaço
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Perguntas e discussão
Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.