Este conteúdo está disponível atualmente em seu idioma original.
ThinkGrow 12'Daisy chain control cable
Modelo / SKU: ECS-7
ThinkGrow ECS-7 12 ft Daisy Chain Control Cable for LMA-T Bridges
- Model
- ECS-7
- Length
- 12 ft (3.66 m)
- Connector
- RJ12 to 4-pin IP65 threaded waterproof
- Compatible Fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.
Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.
Um pouco mais sobre este produto
ThinkGrow ECS-7 12 ft Daisy Chain Control Cable for LMA-T Bridges
Product details
- ThinkGrow's ECS-7 is the 12 ft (3.66 m) low-voltage control cable.
- It bridges a TrolMaster LMA-T lighting adapter to ThinkGrow's Model-I, Model-H, Model-V, and Model-W LED fixtures.
- RJ12 on the controller side, a 4-pin IP65 threaded waterproof connector on the fixture side.
- Daisy-chain pass-through at every fixture lets a single controller line sync dim levels across an entire room.
- Where the ECS-7 Sits in a TrolMaster Daisy Chain
- Standard layout: Hydro-X controller into LMA-T adapter into ECS-7 to first fixture into ECS-7 fixture-to-fixture down the row.
- Growers typically place the LMA-T near the controller and run the ECS-7 along the same ceiling truss as the power cords.
- The IP65 fixture connector matters when the room runs evaporative cooling or any supplemental humidity.
- Water on a non-sealed signal connector eventually corrodes pins and trips intermittent dimming bugs that look like driver failures.
- Signal cable only, not power.
- Cable length: 12 ft (3.66 m), enough to bridge LMA-T to first fixture or fixture-to-fixture in a typical row
- Connectors: RJ12 controller-side, 4-pin IP65 threaded waterproof fixture-side
- Function: Daisy-chain control signal — syncs dim levels and schedules across the run
- Compatible fixtures: ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
- Bridge requirement: Pairs with TrolMaster LMA-T adapter on the Hydro-X / Hydro-X Pro side
- Technical Specifications
Especificações
- Model
- ECS-7
- Length
- 12 ft (3.66 m)
- Connector
- RJ12 to 4-pin IP65 threaded waterproof
- Compatible Fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
- Standard layout
- Hydro-X controller into LMA-T adapter into ECS-7 to first fixture into ECS-7 fixture-to-fixture down the row.
- Cable length
- 12 ft (3.66 m), enough to bridge LMA-T to first fixture or fixture-to-fixture in a typical row
- Connectors
- RJ12 controller-side, 4-pin IP65 threaded waterproof fixture-side
- Compatible fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
Vamos fazer isso funcionar para o seu projeto.
Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.
Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.
Mais possibilidades para o seu espaço
Yield Lab Professional Series Double Ended Grow Light Reflector
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Perguntas e discussão
Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.