Este conteúdo está disponível atualmente em seu idioma original.
Ruck 8 Back Draught Dampner
Modelo / SKU: 149394
How the 8 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.
Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.
Um pouco mais sobre este produto
How the 8 Inch Back Draught Damper Seals an Idle Duct
Product details
- Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
- The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
- On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
- Mounting a Backdraft Shutter in the Right Place
- Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
- Put it downstream of the fan with the flaps opening the way the air goes.
- The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
- Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
- If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
- Nudge the speed up a step.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Especificações
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Vamos fazer isso funcionar para o seu projeto.
Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.
Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.
Mais possibilidades para o seu espaço
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Perguntas e discussão
Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.