Uma forma mais inteligente de crescer. Venda por atacado direto da fábrica. Mais de 15 anos de crescente experiência

Este conteúdo está disponível atualmente em seu idioma original.

Ruck 4 Back Draught Dampner

Modelo / SKU: 148389

How the 4 Inch Back Draught Damper Seals an Idle Duct

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
Preço de referência da fonteEUR 16.31

Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.

Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.

Suporte direto da fábricaMais de 15 anos de experiência
UMA ANÁLISE MAIS DETALHADA

Um pouco mais sobre este produto

How the 4 Inch Back Draught Damper Seals an Idle Duct

Product details

  • This is a one-way gate in the duct.
  • Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
  • The housing is galvanized sheet steel.
  • On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
  • Mounting a Backdraft Shutter in the Right Place
  • It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
  • Fit it downstream of the fan with the flaps opening in the direction of flow.
  • Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
  • Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
  • On a small run the flaps are light enough to open at low fan speed without stalling.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Especificações

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Vamos fazer isso funcionar para o seu projeto.

Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.

Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.

VAMOS CRESCER JUNTOS

Perguntas e discussão

0

Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.

CONTINUE EXPLORANDO

Mais possibilidades para o seu espaço

Ver todos os produtos
O INÍCIO DE ALGO BOM

Vamos dar visibilidade ao seu projeto.

Conte-nos um pouco sobre suas necessidades. Usaremos suas informações para preparar uma proposta de atacado adequada.

Sua lista de produtos

Sem pagamento. Sem compromisso. Apenas uma conversa útil.