Uma forma mais inteligente de crescer. Venda por atacado direto da fábrica. Mais de 15 anos de crescente experiência

Este conteúdo está disponível atualmente em seu idioma original.

Hidroponia e IrrigaçãoConsulta de atacado

Netafim Pulse Reed Switch

Modelo / SKU: 70220-005300

What a Pulse Reed Switch Adds to a Water Meter

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.
Preço de referência da fonteEUR 64.12

Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.

Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.

Suporte direto da fábricaMais de 15 anos de experiência
UMA ANÁLISE MAIS DETALHADA

Um pouco mais sobre este produto

What a Pulse Reed Switch Adds to a Water Meter

Product details

  • A mechanical meter counts perfectly well and tells nobody.
  • This register sits on the meter and adds an electrical output.
  • No power is needed on the meter side, because the switch is passive.
  • Reading the Water Meter Pulse Output at the Controller
  • Any controller, datalogger or PLC with a digital input can take it, which is what makes a water meter pulse output so portable across equipment.
  • The controller does the arithmetic: count the pulses, multiply by the volume each pulse represents, and you have consumption.
  • That multiplier is set by the meter rather than by the switch, and Netafim meters are supplied in different pulse values.
  • Check the register on the meter you are fitting, because getting that number wrong scales every reading you log.
  • Two practical notes.
  • Reed contacts are mechanical and they do eventually wear, which is the usual reason one gets replaced rather than a fault in the meter itself.
  • And run the signal pair away from pump and light wiring, since a long unshielded run beside a contactor can pick up false counts.
  • Passive, no power needed: The switch takes nothing on the meter side.
  • The controller supplies the sensing circuit.
  • Volume per pulse is set by the meter: Netafim meters ship in different pulse values, so check the register before you scale readings.
  • A common replacement part: Reed contacts are mechanical and wear, which is usually why one is swapped.
  • Keep the run clean: Route the signal pair away from pump and lighting wiring to avoid false counts.
  • Technical Specifications

Especificações

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.

Vamos fazer isso funcionar para o seu projeto.

Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.

Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.

VAMOS CRESCER JUNTOS

Perguntas e discussão

0

Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.

CONTINUE EXPLORANDO

Mais possibilidades para o seu espaço

Ver todos os produtos
O INÍCIO DE ALGO BOM

Vamos dar visibilidade ao seu projeto.

Conte-nos um pouco sobre suas necessidades. Usaremos suas informações para preparar uma proposta de atacado adequada.

Sua lista de produtos

Sem pagamento. Sem compromisso. Apenas uma conversa útil.