Este conteúdo está disponível atualmente em seu idioma original.
Hidroponia e IrrigaçãoConsulta de atacado
Netafim 3/4in Insert Coupling with Rings - 100 Pack
Modelo / SKU: 32500-021530
Netafim 3/4in Insert Coupling with Rings
- Nominal Size
- 3/4 inch
- Fitting Type
- Straight coupling, barb x barb
- Pipe Inside Diameter
- 22 mm
- Pipe Wall Thickness
- 1.5 mm
Preço de referência da fonteEUR 83.91
Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.
Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.
Suporte direto da fábricaMais de 15 anos de experiência
UMA ANÁLISE MAIS DETALHADA
Um pouco mais sobre este produto
Netafim 3/4in Insert Coupling with Rings
Product details
- Supply pipe and heavy wall dripline both get cut, extended and rerouted over the life of a system.
- This straight insert fitting joins two pieces end to end so the run carries on as one line.
- Each half of the coupling carries a series of raised rings.
- Those rings are the barb, and each one bites into the inside of the pipe as it slides on.
- Several rings in a row give the joint more grip than a single ridge.
- Its brown color and part number match the 25 mm barb coupling in Netafim's connector catalog.
- Netafim lists that size for pipe with a 22 mm inside diameter and a 1.5 mm wall.
- Netafim describes the barb connector body as a UV and chemical resistant polymer.
- That matters on exposed runs and in lines that carry fertilizer.
- The fitting is a single molded piece with no nuts, sleeves or loose seals.
- Installation takes a sharp cutter and hand pressure, nothing more.
- A bag of 100 covers a full season of repairs and new lateral work across a large site.
- Making a Barbed Pipe Coupling Hold
- Turn the zone off and drain the pressure before cutting the line.
- Cut out any damaged section and square both pipe ends.
- A clean, straight cut lets the pipe seat evenly over all the rings.
- Check the pipe size against the fitting before pushing it on.
- Warm stiff pipe in the sun or in warm water so it stretches over the rings more easily.
- Push one pipe end onto the coupling with a slight twisting motion until it covers every ring.
- Repeat on the other side so both pipes meet near the middle.
- Do not use oil or soap on the barbs.
- A dry fit grips better.
- Turn the zone on slowly and watch both joints at working pressure.
- A small leak usually means the pipe did not slide fully over the last ring.
- On buried or exposed pipe, keep the joint straight and out of tension so the pipe does not pull back off.
- Flush the line after a repair to clear out soil and pipe shavings.
- Store spare couplings in their bag, away from sun, until they are needed.
- Ringed Barbs: Multiple raised rings grip the inside of the pipe.
Especificações
- Fitting Type
- Straight coupling, barb x barb
- Nominal Size
- 3/4 inch
- Pipe Inside Diameter
- 22 mm
- Pipe Wall Thickness
- 1.5 mm
- Color
- Brown
- Material
- UV and chemical resistant polymer
- Pack Quantity
- 100
Vamos fazer isso funcionar para o seu projeto.
Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.
Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.
CONTINUE EXPLORANDO
Ver todos os produtosMais possibilidades para o seu espaço
Hidroponia e Irrigação
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
Referência da fonteEUR 199.27
Hidroponia e Irrigação
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
Referência da fonteEUR 181.15
Hidroponia e Irrigação
Yield Lab 600w HPS Air Cool Tube Digital Dimming Grow Light Kit
Referência da fonteEUR 172.09
Perguntas e discussão
Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.