Este conteúdo está disponível atualmente em seu idioma original.
LTL Controls Master 8 - Lighting Relay Controller
Modelo / SKU: 270008
A lighting relay controller for up to eight HID ballasts
- Max Wattage
- 8000W (1000W per outlet)
- Main Voltage
- 120V or 240V
- Type
- HID lighting relay controller
- Max Relay Amperage
- 50 A
Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.
Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.
Um pouco mais sobre este produto
A lighting relay controller for up to eight HID ballasts
Product details
- The Master 8 switches up to eight 1000W HID ballasts, 8000W across eight universal outlets.
- That brings a full bank of lights on and off together.
- It runs on 120V or 240V and carries up to 50 amps through relays rated for at least 100,000 operations at full load.
- Because it is a relay controller, it handles the switching while a separate timer sets the schedule.
- Growers connect the included 120V trigger cable to a standard timing device to run the whole bank on one cycle.
- Wiring and safety on the Master 8
- The universal outlets accept common ballast plugs, and the 50-amp relay leaves headroom for a full eight-lamp bank.
- Because it switches high-amperage mains power, LTL strongly recommends a certified electrician for install if you are not familiar with electrical wiring.
- One note: this is a relay switch, not a dimmer, so it runs lights full-on or off rather than at reduced output.
- Eight HID Outlets: Switches up to eight 1000W ballasts, 8000W total.
- 120V or 240V: Runs on either main voltage through universal outlets.
- 50-Amp Relay: Handles up to 50 amps with headroom for a full bank.
- Timer-Triggered: Includes a 120V trigger cable for any standard timing device.
- Technical Specifications
Especificações
- Type
- HID lighting relay controller
- Max Wattage
- 8000W (1000W per outlet)
- Main Voltage
- 120V or 240V
- Max Relay Amperage
- 50 A
- Operating Humidity
- 0-99% non-condensing
Vamos fazer isso funcionar para o seu projeto.
Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.
Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.
Mais possibilidades para o seu espaço
Yield Lab Heat Mat Thermostat Temperature Controller
Perguntas e discussão
Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.