Uma forma mais inteligente de crescer. Venda por atacado direto da fábrica. Mais de 15 anos de crescente experiência

Este conteúdo está disponível atualmente em seu idioma original.

Acessórios de iluminaçãoConsulta de atacado

Growlink HUB Connection Cable (3M)

Modelo / SKU: HUB-CON-3M

Wiring the Growlink HUB Connection Cable into Your LINKS System

HUB Power Budget
Within 1A shared across 8 ports
Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
Preço de referência da fonteEUR 9.05

Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.

Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.

Suporte direto da fábricaMais de 15 anos de experiência
UMA ANÁLISE MAIS DETALHADA

Um pouco mais sobre este produto

Wiring the Growlink HUB Connection Cable into Your LINKS System

Product details

  • The Growlink HUB Connection Cable runs a 3-meter (9 ft 10 in) line between any compatible LINKS device and the LINKS 8-Port Device HUB.
  • It uses 8-conductor RJ-45 straight-through wiring terminated on standard RJ-45 jacks at both ends.
  • The single cable carries 24VDC power and Modbus data together.
  • That keeps each device on one port instead of pulling power and signal on separate runs.
  • The wiring matches what the HUB documentation calls out for every port, so any 8-conductor RJ-45 cable to that spec drops in.
  • Planning Runs with a 3m LINKS Device RJ-45 Cable
  • At 3 meters, the run covers most layouts where the HUB sits just outside a flower room.
  • The device end can land on a canopy frame, controller wall, or substrate tray inside the space.
  • Growers running the 8-Port Device HUB usually allocate one cable per LINK device port.
  • The canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, and Batch TankLINK family all use this same connector.
  • Each draws within the HUB's 1A power budget.
  • If a sensor lands farther out, this Growlink HUB accessory pairs with another drop to bridge the gap.
  • A single LINKS automation cable rarely reaches a far-corner device on its own in larger rooms.
  • 3-Meter Length: Spans 9 ft 10 in from HUB port to device — long enough for most room-to-canopy runs.
  • RJ-45 Straight-Through Wiring: Eight-conductor pinout matches every Growlink LINK device port and the HUB's documented spec.
  • Power + Data on One Line: Delivers 24VDC and Modbus signal so each LINK draws everything from a single port.
  • HUB-Native Connector: Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.
  • Cultivation-Environment Build: Jacketing holds up to the temperature swings and humidity typical inside flower and veg rooms.
  • Technical Specifications

Especificações

Length
3 m (9 ft 10 in)
Connector
RJ-45 (8P8C)
HUB Power Budget
Within 1A shared across 8 ports
Compatible Devices
canopyLINK, quadLINK, valveLINK, lightLINK, relayLINK, Batch TankLINK family
HUB-Native Connector
Plugs directly into Device Ports 1–8 on the LINKS 8-Port Device HUB with no adapter.

Vamos fazer isso funcionar para o seu projeto.

Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.

Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.

VAMOS CRESCER JUNTOS

Perguntas e discussão

0

Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.

CONTINUE EXPLORANDO

Mais possibilidades para o seu espaço

Ver todos os produtos
O INÍCIO DE ALGO BOM

Vamos dar visibilidade ao seu projeto.

Conte-nos um pouco sobre suas necessidades. Usaremos suas informações para preparar uma proposta de atacado adequada.

Sua lista de produtos

Sem pagamento. Sem compromisso. Apenas uma conversa útil.