Uma forma mais inteligente de crescer. Venda por atacado direto da fábrica. Mais de 15 anos de crescente experiência

Este conteúdo está disponível atualmente em seu idioma original.

Controladores e MedidoresConsulta de atacado

Growlink Batch TankLINK pH Sensor

Modelo / SKU: GL-LINK-PHSENSOR

Reading Acidity with the Growlink Batch TankLINK pH Sensor

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Preço de referência da fonteEUR 72.47

Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.

Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.

Suporte direto da fábricaMais de 15 anos de experiência
UMA ANÁLISE MAIS DETALHADA

Um pouco mais sobre este produto

Reading Acidity with the Growlink Batch TankLINK pH Sensor

Product details

  • The Growlink Batch TankLINK pH Sensor reads nutrient solution acidity inside a batch tank or reservoir in real time.
  • The probe covers the full 0–14 pH range at ±0.02 pH accuracy with 0.01 pH resolution.
  • A 10-foot cable runs from the sensor to the Batch TankLINK controller.
  • The cable terminates on a BNC connector that pushes onto the controller port.
  • A quarter-turn clockwise locks it in place.
  • Inside the typical hydroponic feed window of 5.5–6.5 pH, that accuracy is tight enough to confirm a fresh batch lands inside spec on the first mix.
  • Calibrating and Maintaining the TankLINK pH Probe
  • Calibration is a two-point process with pH 7.00 and pH 4.01 buffer solutions.
  • The TankLINK LCD wizard walks the probe through each buffer in turn and locks the cal at a stable voltage.
  • Run cal at the start of each batch or whenever the reading drifts past ±0.05 pH between known mixes.
  • The pH probe ships in a storage cap of pH 4 buffer and potassium chloride.
  • The membrane needs to stay wet between runs.
  • A dry membrane is the fastest way to kill a pH probe early.
  • Keep the storage cap on whenever the sensor sits out of solution.
  • Plug-and-play wiring keeps a single-probe swap during teardown under a minute.
  • The nutrient tank pH probe twists out of the BNC port and a fresh one twists in.
  • 0–14 pH Range: Full-scale read covers anything a hydro feed will ever hit, including post-dosing spikes.
  • ±0.02 pH Accuracy: Tight enough to confirm fresh mixes land in the 5.5–6.5 feed window on the first measurement.
  • 0.01 pH Resolution: Catches small drifts between feeds before they show up as canopy stress symptoms.
  • BNC Connector with 1/4-Turn Lock: Push-on, twist-lock fit on the TankLINK controller's labeled port — no rewiring at swap.
  • Two-Point Calibration: pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.
  • Technical Specifications

Especificações

pH Range
0–14
Connector
BNC (push + 1/4-turn CW lock)
Cable Length
10 ft (3 m)
Calibration
Two-point @ pH 7.00 and pH 4.01 via LCD wizard
Compatible Controller
Growlink Batch TankLINK
Two-Point Calibration
pH 7.00 and pH 4.01 buffers through the LCD wizard handle the full cal in one pass.

Vamos fazer isso funcionar para o seu projeto.

Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.

Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.

VAMOS CRESCER JUNTOS

Perguntas e discussão

0

Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.

CONTINUE EXPLORANDO

Mais possibilidades para o seu espaço

Ver todos os produtos
O INÍCIO DE ALGO BOM

Vamos dar visibilidade ao seu projeto.

Conte-nos um pouco sobre suas necessidades. Usaremos suas informações para preparar uma proposta de atacado adequada.

Sua lista de produtos

Sem pagamento. Sem compromisso. Apenas uma conversa útil.