Este conteúdo está disponível atualmente em seu idioma original.
Bluelab Pro Controller Wi-Fi
Modelo / SKU: 716489
What the Bluelab Pro Controller Wi-Fi Holds to Setpoint
- Power Supply
- 100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A
- pH Range / Accuracy
- 0.0 - 14.0 / ±0.1 @ 25°C
- Temperature Range
- 0-50°C / 32-122°F
- Probe Cable Length
- 2 m (6 ft)
Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.
Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.
Um pouco mais sobre este produto
What the Bluelab Pro Controller Wi-Fi Holds to Setpoint
Product details
- Three parameters, and you can run one, two or all three.
- It reads pH across 0.0-14.0 at ±0.1 and conductivity from 0 to 5.0 EC at ±0.1.
- Temperature covers 0-50°C / 32-122°F.
- It then doses to bring each parameter back to the value you programmed.
- Dosing intervals are yours to tune against pump size, tank volume and stock dilution, which keeps a small tank from overshooting.
- It runs on a 100-240 VAC supply, so it is not fussy about the panel it lands next to.
- Every probe is removable and replaceable, on 2 m cables.
- Running an Automatic pH and EC Controller Without Getting Burned
- The safety logic is the part worth paying for.
- High and low alarms sit on each parameter.
- Internal lockouts stop nutrient dosing when a temperature alarm fires.
- An external terminal lets a flow switch kill all dosing when the pump is idle.
- Automatic lockouts also stop dosing outright if the unit detects a fault.
- Set your lockouts before your setpoints.
- The pH probe carries a calibration quality indicator, so you know when it is drifting rather than finding out through a crop.
- Two things to budget for.
- The controller does not include the dosing pumps, so a Peridoser or Solenoid is a separate line item.
- A Bluelab Connect Stick is included.
- Controls pH, conductivity and temperature: Run one parameter or all three, each with its own high and low alarm and its own setpoint.
- Tunable dosing intervals: Match dose length to pump size, tank volume and stock dilution so a small reservoir does not overshoot.
- Layered safety lockouts: Internal, external and automatic fault lockouts stop dosing before a stuck pump becomes a dead crop.
- Replaceable probes on 2 m cables: pH connects by BNC, and every probe comes off individually rather than forcing a whole-unit swap.
- Bluelab Connect Stick included: Data logs and remote monitoring through Bluelab Connect without a separate stick.
- Technical Specifications
Especificações
- pH Range / Accuracy
- 0.0 - 14.0 / ±0.1 @ 25°C
- Temperature Range
- 0-50°C / 32-122°F
- Power Supply
- 100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A
- Probe Cable Length
- 2 m (6 ft)
- Connectivity
- Wi-Fi, Bluelab Connect (stick included)
- Dosing Compatibility
- Bluelab Peridoser and Solenoid dosing systems
- Bluelab Connect Stick included
- Data logs and remote monitoring through Bluelab Connect without a separate stick.
Vamos fazer isso funcionar para o seu projeto.
Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.
Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.
Mais possibilidades para o seu espaço
Yield Lab Heat Mat Thermostat Temperature Controller
Perguntas e discussão
Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.