Este conteúdo está disponível atualmente em seu idioma original.
Ventilação e ClimatizaçãoConsulta de atacado
4 inch Backdraft Damper
Modelo / SKU: VTBDD4
What a 4 inch Backdraft Damper Is Stopping
- Duct size
- Four inches, matching a four inch inline fan or run
- Duct diameter
- 4 in
- Type
- Round backdraft damper, duct insert
- Material
- Galvanized steel
Preço de referência da fonteEUR 21.73
Apenas para fins de comparação. Solicite seu preço de atacado atual, disponibilidade e condições de entrega.
Nenhum pagamento é necessário. Uma conversa sobre o que você precisa.
Suporte direto da fábricaMais de 15 anos de experiência
UMA ANÁLISE MAIS DETALHADA
Um pouco mais sobre este produto
What a 4 inch Backdraft Damper Is Stopping
Product details
- A duct with nothing in it is a two way street.
- When the fan is off, outside air walks back down the run, bringing cold, smell and whatever is living in the roof space with it.
- On a sealed room it also breaks the pressure relationship you built the extraction around.
- A backdraft damper closes that street in one direction.
- Two blades sit inside the body, each on its own independent hinge.
- That independence is the design detail worth paying for, because a single shared shaft means one sticky blade holds the other open.
- The body is galvanized steel and the whole assembly pushes into the duct, so there is no flange to fit and no transition to build.
- It installs in any orientation.
- The blades close onto a neoprene perimeter seal rather than metal onto metal, which is what makes the closure quiet as well as tight.
- Why Static Pressure Decides Whether It Opens at All
- One figure matters more on a small duct than anywhere else.
- The blades need between four and eight hundredths of an inch of static pressure before they lift.
- That is not very much pressure at all.
- A small fan at the end of a long flexible run, with a loaded carbon filter in front of it, does not always make it.
- The symptom is a fan that runs while nothing moves, and the cause looks like a dead fan rather than a shut damper.
- Two habits between them avoid it entirely.
- Keep the run short and use rigid duct where the layout allows, since flexible duct costs several times the resistance for the same length.
- Second, check the damper by hand at commissioning with the fan at its lowest intended speed rather than at full.
- A unit that will be run at thirty percent overnight needs to open at thirty percent.
- The damper is sized for a four inch duct and suits the smaller Vortex in-line fans.
- Duct size: Four inches, matching a four inch inline fan or run
- Function: Stops air travelling back down the duct when the fan is off
- Blades: Two, each on an independent hinge so neither can jam the other
- Seal: A neoprene perimeter gasket rather than metal onto metal
- Noise: That gasket is what makes the closure quiet as well as tight
- Body: Galvanized steel throughout the housing and both blades
- Mounting: The whole assembly inserts into the duct, with no flange to fit
- Orientation: Installs in any position
Especificações
- Duct diameter
- 4 in
- Type
- Round backdraft damper, duct insert
- Material
- Galvanized steel
- Mounting
- The whole assembly inserts into the duct
- Opening pressure
- 0.04 to 0.08 in of static pressure
- Duct size
- Four inches, matching a four inch inline fan or run
- Noise
- That gasket is what makes the closure quiet as well as tight
Vamos fazer isso funcionar para o seu projeto.
Inclua a quantidade desejada, o local de entrega, a região de cultivo e quaisquer requisitos de voltagem ou tipo de plugue em sua solicitação. As especificações, a disponibilidade, os termos de envio e a garantia serão confirmados em seu orçamento por escrito.
Conversão de referência usando a taxa de câmbio salva com a data 15 de nov. de 2026. Os valores convertidos não constituem uma cotação.
CONTINUE EXPLORANDO
Ver todos os produtosMais possibilidades para o seu espaço
Ventilação e Climatização
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Referência da fonteEUR 135.85
Ventilação e Climatização
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Referência da fonteEUR 126.79
Ventilação e Climatização
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Referência da fonteEUR 108.67
Ventilação e Climatização
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
Referência da fonteEUR 172.09
Perguntas e discussão
Tem alguma pergunta ou algo útil para compartilhar? Inicie a conversa.